MVP33CA
Description
MVP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
- Glass passivated chip
- 6000 W peak pulse power capability with a 10/1000μs waveform
- Low leakage
- Terminal: solder plated, solderable per J-STD-002
- Fast response time: typically less than 1.0ps from 0V to
VBR min.
- plies with following standards: GB3836
Mechanical Data
- Case: Moulded plastic over glass passivated junction
- Terminal: Plated Axial leads, solderable per MIL-STD-750,
Method 2026
- Mounting Position: Any
- Polarity: : Color band denotes cathode end except
Bipolar
Maximum Ratings (TA=25℃ unless otherwise noted)
Parameter Peak power dissipation with a 10/1000μs waveform1 Peak pulse current wih a 10/1000μs waveform Power dissipation on infinite heatsink at TL = 25 °C Peak forward surge current 8.3 ms single half sine-
Typical thermal resistance junction to ambient
Operating junction and storage...
