Datasheet4U Logo Datasheet4U.com

SiP32455 - Slew Rate Controlled Load Switch

This page provides the datasheet information for the SiP32455, a member of the SiP32454 Slew Rate Controlled Load Switch family.

Description

The SiP32454 and SiP32455 are slew rate controlled integrated high side load switches that operate in the input voltage range from 0.8 V to 2.5 V.

The SiP32454 and SiP32455 are of N-channel MOSFET switching elements that provide 28 mΩ switch on resistance.

Features

  • Low input voltage, 0.8 V to 2.5 V.
  • Low RON, 28 mΩ typical.
  • Slew r.

📥 Download Datasheet

Datasheet preview – SiP32455

Datasheet Details

Part number SiP32455
Manufacturer Vishay
File Size 217.54 KB
Description Slew Rate Controlled Load Switch
Datasheet download datasheet SiP32455 Datasheet
Additional preview pages of the SiP32455 datasheet.

📁 Similar Datasheet

  • SIP32452 - Load Switch (Vishay Siliconix)
  • SIP32453 - Load Switch in WCSP4 (Vishay Siliconix)
  • SIP32458 - (SIP32458 / SIP32459) Slew Rate Controlled Load Switch (Vishay Siliconix)
  • SIP32459 - (SIP32458 / SIP32459) Slew Rate Controlled Load Switch (Vishay Siliconix)
  • SIP32411 - Slew Rate Controlled Load Switch (Vishay Siliconix)
  • SIP32413 - (SIP32413 - SIP32416) Slew Rate Controlled Load Switch (Vishay Siliconix)
  • SIP32414 - (SIP32413 - SIP32416) Slew Rate Controlled Load Switch (Vishay Siliconix)
  • SIP32416 - (SIP32413 - SIP32416) Slew Rate Controlled Load Switch (Vishay Siliconix)
  • SIP32431 - Load Switch (Vishay Siliconix)
  • SIP305 - NON-ISOLATED/ 20 WATT (Power-One)
Other Datasheets by Vishay

Full PDF Text Transcription

Click to expand full text
SiP32454, SiP32455 Vishay Siliconix 0.8 V to 2.5 V, 28 mΩ, Slew Rate Controlled Load Switch in WCSP4 DESCRIPTION The SiP32454 and SiP32455 are slew rate controlled integrated high side load switches that operate in the input voltage range from 0.8 V to 2.5 V. The SiP32454 and SiP32455 are of N-channel MOSFET switching elements that provide 28 mΩ switch on resistance. They have a 1 ms at 1.2 V and 1.5 ms at 2.5 V slow slew rate that limits the in-rush current and minimizes the switching noise. These devices’ low voltage logic control threshold can interface with low voltage control I/O directly without extra level shift or driver. A 2 MΩ pull-down resistor is integrated at logic control EN pin. SiP32454 integrates a switch OFF output discharge circuit.
Published: |