Datasheet4U Logo Datasheet4U.com

NTCLE317E4103SBA Datasheet NTC Thermistor

Manufacturer: Vishay

General Description

These negative temperature coefficient thermistors consist of a mini-chip soldered between two AWG #32 PEEK insulated silver plated nickel / iron leads and coated with ocher colored epoxy lacquer.

High adhesive strength between PEEK wire and encapsulating lacquer.

PACKAGING The thermistors are packed in cardboard bo

Overview

www.vishay.com NTCLE317E4103SBA Vishay BCcomponents NTC Thermistors, Long Insulated Leads 150 °C With Very Low Thermal Gradient LINKS TO ADDITIONAL RESOURCES Design Tools QUICK REFERENCE DATA PARAMETER Resistance value at 25 °C Tolerance on R25-value Temperature accuracy between 25 °C and 85 °C -55 °C and 150 °C B25/85-value Tolerance on B25/85-value Operating temperature range at zero dissipation Resistance value at 85 °C Maximum power dissipation at 55 °C Min.

dielectric withstanding voltage (RMS) between leads and coating Dissipation factor  in still air (for information only) Response time (in oil) Weight VALUE 10K ± 2.19 ± 0.5 ± 1.0 3984 ± 0.5 -55 to +150 1066.1 50 100 0.8 0.3  0.05 UNIT  % °C K % °C  mW V mW/K s g DESIGN-IN SUPPORT Not intended for fluid immersed applications or continuous contact with water or conducting liquids.

Can be potted in suitable resins.

Key Features

  • Long and flexible leads for special mounting or assembly requirements.
  • Best accuracy of ± 0.5 °C between 25 °C and 85 °C and ± 1.0 °C between -55 °C and 150 °C.
  • Electrical features of “accuracy line” sensors.
  • Mounting: radial insulated leads, low heat-conducting FeNi wires.
  • AEC-Q200 qualified.
  • Fast response time of 0.3 s with small 1.6 mm head Ø.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99.