Datasheet4U Logo Datasheet4U.com

US203 - HIGH-SIDE POWER SWITCHES

General Description

The UTC US203 are low voltage cost-effective high-side power switches with flag function.

These devices are particularly suitable for self-powered and bus-powered USB applications.

The build-in N-MOSFET’s RDS(ON) which meets the requirements of USB voltage drop is as low as 80mΩ.

Key Features

  • SOP-8 4 5 123 SOT-25 MSOP-8.
  • Input Voltage Varies From 3.5V to 5.5V.
  • Built-in N-MOSFET.
  • Output Can Be Forced Higher Than Input (Off-State).
  • Typical Low Supply Current: - Switch On: 25μA (TYP) - Switch Off: 0.1μA (TYP).
  • Open-Drain Fault Flag Output To Indicate Fault Conditions.
  • Protection Circuits: - Soft-start( Hot plug-in.

📥 Download Datasheet

Full PDF Text Transcription for US203 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for US203. For precise diagrams, and layout, please refer to the original PDF.

UNISONIC TECHNOLOGIES CO., LTD US203 CMOS IC HIGH-SIDE POWER SWITCHES WITH FLAG  DESCRIPTION The UTC US203 are low voltage cost-effective high-side power switches with f...

View more extracted text
C US203 are low voltage cost-effective high-side power switches with flag function. These devices are particularly suitable for self-powered and bus-powered USB applications. The build-in N-MOSFET’s RDS(ON) which meets the requirements of USB voltage drop is as low as 80mΩ. The UTC US203 contains a charge pump circuitry to drive the internal MOSFET switch and also incorporate such protection circuits: soft-start circuit protect these devices from being damaged by limiting inrush current during plug-in; thermal shutdown circuit is used to prevent catastrophic switch failure from high-current loads.