Datasheet4U Logo Datasheet4U.com

75185 - MULTIPLE RS-232 DRIVERS AND RECEIVERS

General Description

The UTC 75185 complies with the requirements of the TIA/EIA232-F and ITU (formerly CCITT) v.28 standards.

These standards are for data interchange between a host computer and peripheral at signaling rates up to 20kbit/s.

Key Features

  • S.
  • Single Chip with Easy Interface between UART and Serial-Port connector of PC.
  • Three Drivers and five Receivers Meet or Exceed the Requirements of TIA/EIA-232-F and ITU v.28 Standards.
  • Designed to Support Data Rates up to 120 kbps.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
7510 SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER Mitsubishi
7512 SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER Renesas
7514A ACCELEROMETER TE
75150 DUAL LINE DRIVER Texas Instruments
75155 LINE DRIVER/RECEIVER Texas Instruments

Other Datasheets by Unisonic Technologies

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD 75185 LINEAR INTEGRATED CIRCUIT MULTIPLE RS-232 DRIVERS AND RECEIVERS  DESCRIPTION The UTC 75185 complies with the requirements of the TIA/EIA232-F and ITU (formerly CCITT) v.28 standards. These standards are for data interchange between a host computer and peripheral at signaling rates up to 20kbit/s. The switching speeds of the UTC 75185 are fast enough to support rates up to 120kbite/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be assured unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates to 120kbit/s, use of ITA/EIA-423-B (ITU v.10) and TIA/EIA-422-B (ITU v.11) standards are recommended.