Datasheet4U Logo Datasheet4U.com

LL204 - DUAL OUTPUT FLASHER

Description

The UTC LL204 is a dual output stages flasher designed as a relay driver for flashing light control in automotive applications.

Both sides direction indicator input with only a small control current makes switch contacts for small loads possible.

Each side of the vehicle is controlled separately.

Features

  • S.
  • Temperature and supply voltage compensated flashing frequency.
  • Frequency doubling indicates lamp fault.
  • Two relay driver outputs with high current-carrying capacity and low saturation voltage.
  • Minimum lamp load for flasher operation: ≥ 1W.
  • Very low sensitivity to EMI.
  • Extremely low current consumption.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LL2012 Wirewound Chip Inductors TOKO
LL2012-F Multilayer Chip Inductors TOKO
LL2012FHL Multilayer Chip Inductors TOKO
LL2 Voltage Stabilizers General Semiconductor
LL2 Zener Diodes Vishay

Other Datasheets by Unisonic Technologies

Part Number Description

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD LL204 LINEAR INTEGRATED CIRCUIT DUAL OUTPUT FLASHER  DESCRIPTION The UTC LL204 is a dual output stages flasher designed as a relay driver for flashing light control in automotive applications. Both sides direction indicator input with only a small control current makes switch contacts for small loads possible. Each side of the vehicle is controlled separately. The construction of the hazard switch could be simplified due to hazard warning input is separate. The flasher will dramatically increase the flash frequency by a typical ratio of 2:1 if lamp fault is detected. The UTC LL204 can be directly connected to the battery due to extreme low current consumption.
Published: |