LD2985 Datasheet PDF (VERY LOW DROP AND LOW NOISE VOLTAGE REGULATOR)

LD2985 - VERY LOW DROP AND LOW NOISE VOLTAGE REGULATOR

Description

The UTC LD2985 is a 150mA fixed output voltage regulator.

The ultra low drop voltage and the low quiescent current make them particularly suitable for low noise, low power applications, and in battery powered systems.

In sleep mode quiescent current is less than 1μA when INHIBIT pin is pulled low.

Features

Very Low Dropout Voltage (280mV at 150mA and 7mV at 1mA load).
Very Low Quiescent current.
Output Current up to 150mA.
Logic Controlled Electronic Shutdown.
Internal Current and Thermal Limit.
Low Output Noise Voltage 30μVrms.

Datasheet Details

Part number	LD2985
Manufacturer	UTC
File Size	354.33 KB
Description	VERY LOW DROP AND LOW NOISE VOLTAGE REGULATOR
Datasheet	LD2985 Datasheet
Additional preview pages of the LD2985 datasheet.

📁 Similar Datasheet

LD2985 - Very low drop and low noise voltage regulator (ST Microelectronics)

LD2980 - Ultra low drop voltage regulators (ST Microelectronics)

LD2981 - Ultra low-drop voltage regulators (ST Microelectronics)

LD2982 - VERY LOW DROP AND LOW NOISE VOLTAGE REGULATOR WITH INHIBIT FUNCTION / LOW ESR CAP. COMPATIBLE (ST Microelectronics)

LD29080 - VERY LOW DROP VOLTAGE REGULATOR (STMicroelectronics)

LD29150 - 1.5A VERY LOW DROP VOLTAGE REGULATORS (ST Microelectronics)

LD29300 - 3A VERY LOW DROP VOLTAGE REGULATORS (ST Microelectronics)

LD2940 - 1A Ultra Low Dropout Voltage Regulator (TAITRON)

LD2979 - VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT (ST Microelectronics)

LD20-5T - (LDxx-5T) General Purpose Silicon Sensors (CENTRONIC)

Full PDF Text Transcription

Click to expand full text

UNISONIC TECHNOLOGIES CO., LTD LD2985 LINEAR INTEGRATED CIRCUIT VERY LOW DROP AND LOW NOISE VOLTAGE REGULATOR LOW ESR CAP. COMPATIBLE, WITH INHIBIT FUNCTION  DESCRIPTION The UTC LD2985 is a 150mA fixed output voltage regulator. The ultra low drop voltage and the low quiescent current make them particularly suitable for low noise, low power applications, and in battery powered systems. In sleep mode quiescent current is less than 1μA when INHIBIT pin is pulled low. Shutdown Logic Control Function is available on pin 3 (TTL compatible). This means that when the device is used as local regulator, it is possible to put a part of the board in standby, decreasing the total power consumption. An external capacitor, CBYP=10nF, connected between bypass pin and GND reduce the noise to 30μVrms.

Published: Apr 12, 2007 |