Datasheet4U Logo Datasheet4U.com

L8602 - LOW POWER 6 STAGE FET LNA AND MIXER BIAS CONTROLLER

Description

The UTC L8602 is a programmable low power depletion mode FET bias and mixer controller intended primarily for satellite Low Noise Blocks (LNBs).

Features

  • S.
  • Low quiescent supply current, 1.6mA typical.
  • Six stage FET bias controller, two configurable as mixer stages.
  • Operating range of 3.0V to 8.0V.
  • Amplifier FET drain voltages set at 2.0V, mixer drain voltage set at 0.25V.
  • Amplifier FET drain current selectable from 0 to 15mA, mixer current from 0 to 7.5mA.
  • Switchable FET’s for power management.
  • FET drain voltages and currents held stable over temperature and VCC variations.
  • FETs protected against overstres.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Unisonic Technologies

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD L8602 Preliminary LINEAR INTEGRATED CIRCUIT LOW POWER 6 STAGE FET LNA AND MIXER BIAS CONTROLLER „ DESCRIPTION The UTC L8602 is a programmable low power depletion mode FET bias and mixer controller intended primarily for satellite Low Noise Blocks (LNBs). Designed to provide system flexibility the UTC L8602 can be programmed to bias six low noise amplifier (LNA) stages or four LNA and two active mixer stages, allowing the UTC L8602 to be used in several system designs. Combining an advanced IC process and packaging techniques, the UTC L8602 helps minimize power consumption, component cost and PCB area whilst enhancing overall reliability. „ FEATURES * Low quiescent supply current, 1.
Published: |