Datasheet4U Logo Datasheet4U.com

L1131A - LOW NOISE 150mA LDO REGULATOR

Datasheet Summary

Description

The UTC L1131A is a COMS positive linear regulator.

One of it’s feature is the very low quiescent current typical as low as 10μA and its dropout voltage is extremely low with 150mA output current, and high ripple rejection.

Features

  • r>.
  • Low supply current Typ. 4.3μA.
  • Standby mode Typ. 0.1μA.
  • Output Voltage Range 1.2V~5.0V.
  • Excellent line regulation Typ. 0.02%/V.
  • Built-in fold back protection circuit.
  • Ceramic capacitors are recommended to be used with this IC CIN=COUT=1μF.

📥 Download Datasheet

Datasheet preview – L1131A

Datasheet Details

Part number L1131A
Manufacturer UNISONIC TECHNOLOGIES
File Size 243.58 KB
Description LOW NOISE 150mA LDO REGULATOR
Datasheet download datasheet L1131A Datasheet
Additional preview pages of the L1131A datasheet.

📁 Similar Datasheet

  • L1131B - LOW NOISE 200mA LDO REGULATOR (UTC)
  • L1131C - LOW NOISE 150mA LDO REGULATOR (UTC)
  • L11354-01 - Photo IC (HAMAMATSU)
  • L11398 - High-Power QCW Laser Diode Stack Module (HAMAMATSU)
  • L113EDT - 2 X 5 MM RECTANGULAR SOLID LAMPS (ETC)
  • L113GDT - 2 X 5 MM RECTANGULAR SOLID LAMPS (ETC)
  • L113HDT - 2 X 5 MM RECTANGULAR SOLID LAMPS (ETC)
  • L113IDT - 2 X 5 MM RECTANGULAR SOLID LAMPS (ETC)
  • L113SRDT - 2 X 5 MM RECTANGULAR SOLID LAMPS (ETC)
  • L113YDT - 2 X 5 MM RECTANGULAR SOLID LAMPS (ETC)
Other Datasheets by UNISONIC TECHNOLOGIES

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD L1131A LOW NOISE 150mA LDO REGULATOR  DESCRIPTION The UTC L1131A is a COMS positive linear regulator. One of it’s feature is the very low quiescent current typical as low as 10μA and its dropout voltage is extremely low with 150mA output current, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a short current limit circuit, a chip enable circuit, and so on. These ICs perform with low dropout voltage and the chip-enable function. The supply current at no load of this IC is only 4.
Published: |