Datasheet4U Logo Datasheet4U.com

MDC-163 - Termination-Insensitive Biasable Mixer

General Description

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle.

This allows for higher power level performance with minimum distortion.

Key Features

  • LO Drive: 0 dBm.
  • Intermodulation Ratio Insensitive to IF Ports Mismatches.
  • Conversion Loss: 7 dB Typical Midband.
  • Impedance: 50 Ohms Nominal.
  • Maximum Input Power: 500 mW max. @ 25°C, Derated 6.4 mW/°C.
  • Low Power: +24 dBm Max.
  • DC Bias: +5, -5 VDC @12 mA each.
  • MIL-STD-883 Screening Available MDC-163 V3 C-2.

📥 Download Datasheet

Other Datasheets by Tyco Electronics (now TE Connectivity)

Part Number Description
MDC-162 Termination-Insensitive Mixer
MDC-164 Termination-Insensitive Mixer
MDC-179 Termination Insensitive Mixer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Termination-Insensitive Biasable Mixer, 1 - 6 GHz Features • LO Drive: 0 dBm • Intermodulation Ratio Insensitive to IF Ports Mismatches • Conversion Loss: 7 dB Typical Midband • Impedance: 50 Ohms Nominal • Maximum Input Power: 500 mW max. @ 25°C, Derated 6.4 mW/°C • Low Power: +24 dBm Max. • DC Bias: +5, -5 VDC @12 mA each • MIL-STD-883 Screening Available MDC-163 V3 C-2 Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms.