Datasheet4U Logo Datasheet4U.com

MABACT0048 - 2:1 Flux Coupled Transformer

General Description

M/A-COM’s MABACT0048 is a 2:1 RF Flux Coupled transformer in a low cost, surface mount package.

Ideally suited for high volume CATV/Broadband applications.

Suitable for use in 50 and 75 Ohm systems.

Key Features

  • Surface Mount 2:1 Impedance Excellent amplitude and phase balance 260°C Reflow Compatible RoHS.
  • Compliant Available on Tape and Reel. Reel quantity 2000 MABACT0048 V1P Schematic.

📥 Download Datasheet

Other Datasheets by Tyco Electronics (now TE Connectivity)

Part Number Description
MABACT0040 1:1 Transmission Line Transformer
MABACT0044 1:1 Transmission Line Transformer
MABACT0045 Broadband CATV 4:1 Flux Coupled Transformer
MABACT0047 Flux Coupled Transformer
MABACT0010 1:1 Transmission line Transformer 4.5 - 3000 MHz
MABACT0011 1:4 Flux Coupled Step up Transformer 1 - 350 MHz
MABACT0012 1:1 Flux Coupled Transformer 0.3 - 200 MHz
MABACT0013 1:1 Transmission Line Transformer 50 - 2150 MHz
MABACT0017 4:1 Tx Line Transformer 50-870MHz characterized in a 2.66:1 Z environment
MABACT0018 1:4 RF flux coupled step-up transformer 5.0 - 200 MHz

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com RoHS Compliant 2:1 Flux Coupled Transformer 5-200MHz Features • • • • • • Surface Mount 2:1 Impedance Excellent amplitude and phase balance 260°C Reflow Compatible RoHS* Compliant Available on Tape and Reel. Reel quantity 2000 MABACT0048 V1P Schematic Description M/A-COM’s MABACT0048 is a 2:1 RF Flux Coupled transformer in a low cost, surface mount package. Ideally suited for high volume CATV/Broadband applications. Suitable for use in 50 and 75 Ohm systems. Case Style: SM-164 Pin Configuration Pin No. 1 2 3 4 5 Function Secondary Dot (output 1) Centre Tap (ground) Secondary (output 2) Primary (Ground) Primary Dot (Input) Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .