Datasheet4U Logo Datasheet4U.com

TC74VCXH162374FT - Low-Voltage 16-Bit D-Type Flip-Flop

Key Features

  • 26-Ω series resistors on outputs.
  • Low-voltage operation: VCC = 1.8 to 3.6 V.
  • Bushold on data inputs eliminating the need for external pull-up/pull-down resistors.
  • High-speed operation: tpd = 3.4 ns (max) (VCC = 3.0 to 3.6 V) : tpd = 4.8 ns (max) (VCC = 2.3 to 2.7 V) : tpd = 6.0 ns (max) (VCC = 1.8 V).
  • Output current: IOH/IOL = ±12 mA (min) (VCC = 3.0 V) : IOH/IOL = ±8 mA (min) (VCC = 2.3 V) : IOH/IOL = ±4 mA (min) (VCC = 1.8 V).
  • Latch-up per.

📥 Download Datasheet

Full PDF Text Transcription for TC74VCXH162374FT (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for TC74VCXH162374FT. For precise diagrams, and layout, please refer to the original PDF.

TC74VCXH162374FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCXH162374FT Low-Voltage 16-Bit D-Type Flip-Flop with Bushold The TC74VCXH162374FT is a hi...

View more extracted text
tage 16-Bit D-Type Flip-Flop with Bushold The TC74VCXH162374FT is a high-performance CMOS 16-bit D-type flip-flop. Designed for use in 1.8-V, 2.5-V or 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. This 16-bit D-type flip-flop is controlled by a clock input (CK) and an output enable input ( OE ) which are common to each byte. It can be used as two 8-bit flip-flops or one 16-bit flip-flop. When the OE input is high, the outputs are in a high impedance state. The 26-Ω series resistor helps reducing output overshoot and undershoot without external resistor. The D data inputs