Datasheet4U Logo Datasheet4U.com

TC74VCX164245FT - 16-Bit Dual Supply Bus Transceiver

Key Features

  • (Note).
  • Bidirectional interface between 3.3 V and 2.5 V, 3.3 V and 1.8 V, 2.5 V and 1.8 V.
  • High-speed: tpd = 4.6 ns (max) (VCCB = 3.3 ± 0.3 V, VCCA = 2.5 ± 0.2 V).
  • tpd = 7.1 ns (max) (VCCB = 3.3 ± 0.3 V, VCCA = 1.8 ± 0.15 V).
  • tpd = 7.0 ns (max) (VCCB = 2.5 ± 0.2 V, VCCA = 1.8 ± 0.15 V).
  • Output current: IOH / IOL = ±24 mA (min) (VCC = 3.0 V) : IOH / IOL = ±18 mA (min) (VCC = 2.3 V) : IOH / IOL = ±6 mA (min) (VCC = 1.65 V).
  • Latch-up p.

📥 Download Datasheet

Other Datasheets by Toshiba

Part Number Description
TC74VCX164245 16-Bit Dual Supply Bus Transceiver
TC74VCX162244FT Low-Voltage 16-Bit Bus Buffer
TC74VCX162373FT Low-Voltage 16-Bit D-Type Latch
TC74VCX162374FT Low-Voltage 16-Bit D-Type Flip-Flop
TC74VCX16244FT Low-Voltage 16-Bit Bus Buffer
TC74VCX16245 Low-Voltage 16-Bit Bus Transceiver
TC74VCX16245FT Low-Voltage 16-Bit Bus Transceiver
TC74VCX162721FT Low-Voltage 20-Bit D-Type Flip-Flop
TC74VCX162821FT Low-Voltage 20-Bit D-Type Flip-Flop
TC74VCX162823FT Low-Voltage 18-Bit D-Type Flip-Flop

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TC74VCX164245FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCX164245FT 16-Bit Dual Supply Bus Transceiver The TC74VCX164245FT is a dual supply, advanced high-speed CMOS 16-bit bus transceiver fabricated with silicon gate CMOS technology. It is also designed with over voltage tolerant inputs and outputs up to 3.6 V. Designed for use as an interface between a 3.3-V or 2.5-V bus and a 2.5-V or 1.8-V bus in mixed 3.3-V or 2.5-V/2.5-V or 1.8-V supply systems. The B-port interfaces with the 3.3-V or 2.5-V bus, the A-port with the 2.5-V or 1.8-V bus. The direction of data transmission is determined by the level of the Weight: 0.25 g (typ.) DIR input. The enable input ( OE ) can be used to disable the device so that the buses are effectively isolated.