Datasheet4U Logo Datasheet4U.com

TB67H420FTG - Brushed DC Motor driver

General Description

Pin No.

Key Features

  • Supporting large current (9.0 A) and high voltage (50 V) brushed DC motor operation.
  • Capable of driving two brushed DC motors using dual H-Bridge mode.
  • Capable of driving one stepping motor using dual H-bridge mode.
  • Built-in sense resistor less current control. (ACDS: Advanced Current Detection System).
  • Low Rds (on) MOSFETs (High side+ Low side=0.33 Ω (typ. )).
  • Error detection features (Thermal shutdown (TSD), Over current detection (ISD),.

📥 Download Datasheet

Other Datasheets by Toshiba

Part Number Description
TB67H400AFNG PWM Chopper-Type Brushed DC Motor driver
TB67H400AFTG PWM Chopper-Type Brushed DC Motor driver
TB67H400AHG PWM Chopper-Type Brushed DC Motor driver
TB67H400ANG PWM Chopper-Type Brushed DC Motor driver
TB67H401FTG Brushed DC Motor driver
TB67H410FTG PWM Chopper-Type Brushed DC Motor driver
TB67H410NG PWM Chopper-Type Brushed DC Motor driver
TB67H450AFNG PWM Chopper Type DC Brushed Motor Driver
TB67H450FNG DC Brushed Motor Driver
TB67H451AFNG PWM Chopper Type DC Brushed Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Toshiba BiCD process integrated circuit silicon monolithic TB67H420FTG TB67H420FTG Brushed DC Motor driver with Dual H-bridge mode The TB67H420FTG is a brushed DC motor driver with sense resistor less current control. The internal H-bridge can be controlled independently, as a two brushed DC motor driver or a single stepping motor driver using the dual H-bridge mode. Fabricated with the BiCD process, the TB67H420FTG is rated at 50 V, 9.0 A P-VQFN48-0707-0.50-004 Weight 0.14 g (typ.) Features • Supporting large current (9.0 A) and high voltage (50 V) brushed DC motor operation. • Capable of driving two brushed DC motors using dual H-Bridge mode. • Capable of driving one stepping motor using dual H-bridge mode. • Built-in sense resistor less current control.