Datasheet4U Logo Datasheet4U.com

TB6614FNG - DC Motor Driver

General Description

- Small signal GND I Control signal input 1 Control signal input 2 - Non-connected - Power GND O Output 1 - Motor power supply Motor power supply O Output 2 - Power GND - Non-connected I PWM signal input Stand by signal input - Small signal power supply Remarks Small signal GND With 200 kΩ pull-dow

Key Features

  • Supply Voltage ; VM = 15 V (Max. ).
  • Output Current ; Iout = 1.2 A(avg) /3.2 A (Peak of continuous pulse) Weight: 0.07 g (Typ. ).
  • Output Low-On Resistor ; 0.3 Ω (Upper+Lower Typ. @Vcc = VM = 5 V).
  • Standby (Power save) system.
  • CW / CCW / Shortbrake / Stop function modes.
  • Direct-PWM input terminal included.
  • Built-in thermal shut down circuit (TSD), low voltage detection circuit (UVD), And over current detection circuit (ISD).

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Toshiba Bi-CD Integrated Circuit Silicon Monolithic TB6614FNG Driver IC for DC motor TB6614FNG TB6614FNG is a driver IC for DC motor with output transistor in LDMOS structure with low ON-resister. Two input signals, IN1 and IN2, can choose one of four modes such as CW, CCW, short brake, and stop mode. Features • Supply Voltage ; VM = 15 V (Max.) • Output Current ; Iout = 1.2 A(avg) /3.2 A (Peak of continuous pulse) Weight: 0.07 g (Typ.) • Output Low-On Resistor ; 0.3 Ω (Upper+Lower Typ.