Datasheet4U Logo Datasheet4U.com

OPI127 - OPTICALLY COUPLED ISOLATOR

Features

  •    .
  •  Four output op ons .
  •  Data rates to 250 KBit/s .
  •  15 kV input‐to‐output isola on voltage .
  •  Herme cally sealed .
  •  Direct TTL/STTL interface .
  •  TX‐TXV process available .
  •  High noise immunity .
  •  UL File No.  E 58730.
  •   Descrip on:  Each OPI125, OPI126, OPI127 and OPI128 consists of an op cally coupled isolator with a gallium arsenide infrared emi ng  diode coupled to a monolithic integrated circuit.   This circuit incorporates a photodiode.

📥 Download Datasheet

Datasheet preview – OPI127

Datasheet Details

Part number OPI127
Manufacturer TT
File Size 284.37 KB
Description OPTICALLY COUPLED ISOLATOR
Datasheet download datasheet OPI127 Datasheet
Additional preview pages of the OPI127 datasheet.

📁 Similar Datasheet

  • OPI1000L - Optically Coupled Isolators Surface Mount Low Profile (Bedford Opto Technology)
  • OPI102 - (OPI102 / OPI103) OPTICALLY COUPLED ISOLATORS (OPTEK Technologies)
  • OPI103 - (OPI102 / OPI103) OPTICALLY COUPLED ISOLATORS (OPTEK Technologies)
  • OPI113 - OPTICALLY COUPLED ISOLATORS (ETC)
  • OPI140 - OPTICALLY COUPLED ISOLATOR (OPTEK Technologies)
  • OPI155 - High Speed Op tically Cou pled Isolator (OPTEK)
  • OPI2000 - High Speed Opto Isolator (Bedford Opto Technology)
  • OPI2000M - High Speed Opto Isolator Surface Mount ATEX and IECEx certified (Bedford Opto Technology)
  • OPI2000MK - High Speed Opto Isolator (Bedford Opto Technology)
  • OPI2150 - OPTICALLY COUPLED ISOLATORS (ETC)
Other Datasheets by TT

Full PDF Text Transcription

Click to expand full text
Photologic® Optically Coupled Isolator OPI125, OPI126, OPI127, OPI128 Features:     Four output op ons   Data rates to 250 KBit/s   15 kV input‐to‐output isola on voltage   Herme cally sealed   Direct TTL/STTL interface   TX‐TXV process available   High noise immunity   UL File No. E 58730*  Descrip on:  Each OPI125, OPI126, OPI127 and OPI128 consists of an op cally coupled isolator with a gallium arsenide infrared emi ng  diode coupled to a monolithic integrated circuit.  This circuit incorporates a photodiode, a linear amplifier and a Schmi   trigger on a single silicon chip.  For maximum long‐term stability, both the diode and the Photologic® sensor are  herme cally sealed in separate packages and then mounted in a high dielectric plas c housing.
Published: |