Datasheet4U Logo Datasheet4U.com

OPB827 - Slotted Optical Switch

Description

Each OPB827, OPB828 and OPB829 device consists of an infrared emitting diode (LED, 890 nm center wavelength) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125” (3.18 mm) wide slot in a low-cost black plastic housing.

A variety of aperture sizes are offered (see chart below).

Features

  • 0.125” (3.18 mm) wide, 0.315” (8.00 mm) deep slot.
  • 0.305” (7.75 mm) lead spacing (OPB827).
  • 0.220” (5.59 mm) lead spacing (OPB828).
  • 24-inch 26 AWG wire leads (OPB829).
  • Inexpensive plastic housing OPB827 OPB828 OPB829Z.

📥 Download Datasheet

📁 Similar Datasheet

  • OPB821 - Slotted Optical Switches (OPTEK)
  • OPB821S10 - Slotted Optical Switches (OPTEK)
  • OPB821S3 - Slotted Optical Switches (OPTEK)
  • OPB821S5 - Slotted Optical Switches (OPTEK)
  • OPB823A - SLOTTED OPTICAL SWITCHES (ETC)
  • OPB824A - SLOTTED OPTICAL SWITCHES (ETC)
  • OPB826S - Dual Channel Slotted Optical Switches (OPTEK)
  • OPB826SD - Dual Channel Slotted Optical Switches (OPTEK)
  • OPB829A - SLOTTED OPTICAL SWITCHES (ETC)
  • OPB829B - SLOTTED OPTICAL SWITCHES (ETC)
Other Datasheets by TT

Full PDF Text Transcription

Click to expand full text
Slotted Optical Switch OPB827, OPB828, OPB829Z Series Features:  0.125” (3.18 mm) wide, 0.315” (8.00 mm) deep slot  0.305” (7.75 mm) lead spacing (OPB827)  0.220” (5.59 mm) lead spacing (OPB828)  24-inch 26 AWG wire leads (OPB829)  Inexpensive plastic housing OPB827 OPB828 OPB829Z Description: Each OPB827, OPB828 and OPB829 device consists of an infrared emitting diode (LED, 890 nm center wavelength) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125” (3.18 mm) wide slot in a low-cost black plastic housing. A variety of aperture sizes are offered (see chart below). The OPB827 and OPB828 are designed fro PCBoard mounting with a minimum lead length of 0.35” (8.9 mm) while the OPB829Z (wire version) has 24-inch 26 AWG wire leads.
Published: |