Datasheet4U Logo Datasheet4U.com

SG6510X1 - PC Power Supply Supervisors

Description

SG6510 is designed to provide the voltage supervisor function, remote on/off PSON function, power good (PGO) indicator function, and fault protection (FPO) function for switching power systems.

Features

  • Over-voltage protection (OVP) for 3.3V, 5V and 12V Under-voltage sense (UVS) and protection (UVP) for 3.3V, 5V Open drain output for PGO and FPO pins 300mS power good delay 75mS turn on delay for 3.3V and 5V 2.8mS PSON control to FPO turn-off delay 38mS /38mS PSON control De-bounce 350uS width noise deglitches 2mS UVP De-bounce time 1mS UVS De-bounce time No lockup during the fast AC power on/off Brownout protection function for 3.3V and 5V Wide supply voltage range from 4V to 15V.

📥 Download Datasheet

Datasheet Details

Part number SG6510X1
Manufacturer System General
File Size 222.52 KB
Description PC Power Supply Supervisors
Datasheet download datasheet SG6510X1 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SG6510 DIODE ARRAY CIRCUITS LINFINITY
SG6510DY1 PC Power Supply Supervisors Fairchild Semiconductor
SG6510DZ1 PC Power Supply Supervisors Fairchild Semiconductor
SG6510SY1 PC Power Supply Supervisors Fairchild Semiconductor
SG6510SZ1 PC Power Supply Supervisors Fairchild Semiconductor

Other Datasheets by System General

Part Number Description
SG6513 PC Power Supply Supervisors
SG6513T PC Power Supply Supervisors
SG6516 PC Power Supply Supervisors
SG6841 High-integrated Green-mode PWM Controller
SG6842 Highly Integrated Green-Mode PWM Controller

Full PDF Text Transcription

Click to expand full text
Product Specification PC Power Supply Supervisors SG6510X1 via VDD pin); under voltage sense (UVS) monitoring for 3.3V and 5V; and under voltage protection (UVP) monitoring for 3.3V and 5V. When 3.3V or 5V voltage is decreasing to 2.8V and 4.2V respectively, the under voltage sense (UVS) function will be enabled to reset the PGO signal from high to low. If 3.3V or 5V voltage is further decreasing to 2.5V and 3.6V respectively, FPO will be set to high to turn off the PWM controller IC. To achieve better immunity for lighting surge glitch and to prevent accidental power shut down during dynamic loading condition, the de-bounce time for UVP and UVS is 2mS/1mS respectively. The deglitch time for OVP is 75uS for better noise immunity.
Published: |