Datasheet4U Logo Datasheet4U.com

HV9606DB1 - Current-Mode PWM Multiple Output Flyback Converter

Description

VDD

This is the supply pin for the PWM Logic and Analog circuits.

When the input voltage to the VIN pin exceeds the start voltage the input regulator seeks to regulate the voltage on the capacitor connected to this pin to a nominal 2.9V.

Features

  • of HV9606 IC by presenting a DC/DC converter employing flyback technique to achieve multiple outputs:.
  • 3.3V non-isolated output with ± 1% accuracy. The output power is 350mW.
  • 5V isolated output with ± 5% accuracy. The output power is 150mW.
  • 40V nominal isolated output. The output power is 500mW. The HV9606 current-mode PWM controller features a built-in start-up regulator that can be used to operate the IC from inputs of 15V to 250V. Other features include built-in s.

📥 Download Datasheet

Datasheet Details

Part number HV9606DB1
Manufacturer Supertex Inc
File Size 147.34 KB
Description Current-Mode PWM Multiple Output Flyback Converter
Datasheet download datasheet HV9606DB1 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HV9110 High-Voltage Current-Mode PWM Controller Microchip
HV9112 High-Voltage Current-Mode PWM Controller Microchip
HV9113 High-Voltage Current-Mode PWM Controller Microchip
HV9120 High-Voltage Current-Mode PWM Controller Microchip
HV9123 High-Voltage Current-Mode PWM Controller Microchip

Other Datasheets by Supertex Inc

Part Number Description
HV9606 HV9606 Current-Mode PWM Controller with Supervisor
HV9605 High Voltage Current Mode PWM Controller for ISDN Equipment
HV9605C High Voltage Current Mode PWM Controller
HV9100 High-Voltage Switchmode Controllers with MOSFET
HV9102 High-Voltage Switchmode Controllers with MOSFET

Full PDF Text Transcription

Click to expand full text
HV9606DB1 Current-Mode PWM Multiple Output Flyback Converter Introduction The Supertex HV9606DB1 evaluation board demonstrates the features of HV9606 IC by presenting a DC/DC converter employing flyback technique to achieve multiple outputs: • 3.3V non-isolated output with ± 1% accuracy. The output power is 350mW. • 5V isolated output with ± 5% accuracy. The output power is 150mW. • 40V nominal isolated output. The output power is 500mW. The HV9606 current-mode PWM controller features a built-in start-up regulator that can be used to operate the IC from inputs of 15V to 250V. Other features include built-in soft start, programmable input under voltage lockout and hysteresis, and standby current of 6µA (below UVLO).
Published: |