Datasheet4U Logo Datasheet4U.com

SSW-408 - DC-4 GHz High Power GaAs MMIC SPDT Switch

Description

Stanford Microdevices’ SSW-408 is a high performance Gallium Arsenide Field Effect Transistor MMIC switch housed in a low-cost surface mountable small outline plastic package.

Features

  • High Compression Point : up to 4 Watts.
  • HIgh Linearity : TOIP +55dBm @2GHz.
  • Low DC Power Consumption.
  • Low Insertion Loss : 1.2dB at 2GHz.
  • Operates from Positive or Negative 3V to 8V Supplies.
  • Low Cost Small Outline Plastic Package -20 dB -30 -40 DC 1 2 3 4 GHz.

📥 Download Datasheet

Datasheet Details

Part number SSW-408
Manufacturer Stanford Microdevices
File Size 104.77 KB
Description DC-4 GHz High Power GaAs MMIC SPDT Switch
Datasheet download datasheet SSW-408 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SSW-104-01-T-S Socket Strip Samtec
SSW-1xx-xx-F-x Socket Strip Samtec
SSW-1xx-xx-G-x Socket Strip Samtec
SSW-1xx-xx-S-x Socket Strip Samtec
SSW10N60B 600V N-Channel MOSFET Fairchild Semiconductor

Other Datasheets by Stanford Microdevices

Part Number Description
SSW-108 DC-4 GHz High Isolation GaAs MMIC SPDT Switch
SSW-124 DC-6 GHz High Isolation SPDT GaAs MMIC Switch
SSW-208 DC-4 GHz High Isolation GaAs MMIC SPDT Switch
SSW-224 DC-6 GHZ HIGH ISOLATION SPDT GAAS MMIC SWITCH
SSW-308 DC-3 GHz Low Cost GaAs MMIC SPDT Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary Preliminary Preliminary Product Description Stanford Microdevices’ SSW-408 is a high performance Gallium Arsenide Field Effect Transistor MMIC switch housed in a low-cost surface mountable small outline plastic package. This single-pole, double-throw reflective switch consumes less than 50uA and can operate with positive or negative 3V to 8V supply voltages, making it suitable for use in both infrastructure and subscriber equipment. This switch can be used in all analog and digital wireless communication systems including (but not limited to) AMPS, PCS, DECT, IS-95, IS-136, 802.11, CDPD and GSM. At +5V or –5V bias, typical output power at 1dB compression is 3 watts. 1dB output power over 4 watts and IP3 over +55dBm may be achieved with higher control voltages.
Published: |