Datasheet4U Logo Datasheet4U.com

CXA3685ER - Direct Conversion IC

Description

The CXA3685ER is an IC developed for direct orthogonal detection of L band (1 to 2GHz) IF signals in a digital satellite broadcast reception tuner.

This direct conversion (Zero-IF) technology eliminates the need for the SAW filter that was formerly necessary.

Features

  • ‹ Low power consumption: 430mW (typ. ) ‹ No need for an external inductor and varactor diode ‹ 3.3V single power supply ‹ Reception frequency: 950MHz to 2150MHz ‹ Wide input range (typ.
  • 65dBm to.
  • 15dBm) ‹ Internal wide band 90° phase shifter ‹ Internal output for controlling an external attenuator ‹ Reference signal output for the demodulation circuit ‹ Enables to use external reference signals ‹ Small package: 48-pin VQFN ‹ Enables to reduce power consumption in power save mode.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CXA3070 LED CREE
CXA3314ER 6GHz PLL Sony
CXA3355AER GPS Down Converter IC Sony
CXA3355ER GPS Down Converter IC Sony
CXA3355TQ GPS Down Converter IC Sony

Other Datasheets by Sony Semiconductor Solutions

Part Number Description
CXA3621GE Fingerprint Sensor
CXA3627ER All Band Tuner IC
CXA3627N All Band Tuner IC
CXA3668N Reception Analog Signal Processor IC
CXA3691AEN High-speed Buffer Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Direct Conversion IC for Digital Satellite Broadcast Tuner CXA3685ER Description The CXA3685ER is an IC developed for direct orthogonal detection of L band (1 to 2GHz) IF signals in a digital satellite broadcast reception tuner. This direct conversion (Zero-IF) technology eliminates the need for the SAW filter that was formerly necessary. In addition, the CXA3685ER incorporates an RF gain control amplifier, oscillator circuit, wide-band phase shifter circuit and other RF circuits, a baseband LPF, baseband gain control amplifier, tuning PLL, and the inductor and varactor diode needed for a tuning VCO. This makes it possible to realize the front-end RF block without tuning the RF circuits.
Published: |