SP646-X - 1 Form A Solid State Relay

Solid State Optronic

General Description

The SP646-X is a bi-directional, single-pole, single-throw, normally open multipurpose relay.

The circuit is composed of one LED on the input side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs.

📥 Download Datasheet

SP646-X 1 form a solid state relay by Solid State Optronic - Datasheet Preview

Datasheet Details

Part number	SP646-X
Manufacturer	Solid State Optronic
File Size	186.11 KB
Description	1 Form A Solid State Relay
Datasheet	SP646-X Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
SP6415	Integrated White LED Driver	Sipex Corporation
SP600	Half Bridge 500VDC Driver	Intersil
SP60001	600MHz Low-loss SAW Filter 45MHz Bandwidth	SIPAT
SP6002	Synchronous Rectifier Driver	SYNC POWER
SP6003	Synchronous Rectifier Driver	SYNC POWER

Other Datasheets by Solid State Optronic

Part Number	Description
SP646	1 Form A Solid State Relay

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

www.DataSheet4U.com SP646-X 1 Form A Solid State Relay DESCRIPTION The SP646-X is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the input side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs. This circuit assures no false triggering under most adverse conditions, and a tight zero-volt window not exceeding 5V. A 300-ohm input resistor in series with the LED is also provided in this circuit. FEATURES APPLICATIONS • • • • • • • • • Inverse parallel SCR output High transient immunity 400V blocking voltage 1.