Datasheet4U Logo Datasheet4U.com

SKY65387-11 - 2110-2170 MHz Variable Gain Amplifier

Description

Skyworks SKY65387-11 is a high linearity, Variable Gain Amplifier (VGA) module.

The device includes an input Low-Noise Amplifier (LNA), a variable voltage attenuator, and an output Power Amplifier (PA).

Features

  • Frequency range: 2110 to 2170 MHz.
  • High gain: >30 dB.
  • Attenuation range: > 35 dB.
  • OP1dB: >+28 dBm.
  • ACLR <.
  • 65 dBc for POUT = +12 dBm.
  • Single DC supply: +5 V.
  • Small MCM (12-pin, 8.385 x 8.385 mm) SMT package (MSL3, 260 °C per JEDEC J-STD-020) Skyworks Pb-free products are compliant with all applicable legislation. For additional information, refer to Skyworks Definition of Lead (Pb)-Free, document number SQ04-0073. VCTRL RF.

📥 Download Datasheet

Datasheet Details

Part number SKY65387-11
Manufacturer Skyworks Solutions
File Size 1.00 MB
Description 2110-2170 MHz Variable Gain Amplifier
Datasheet download datasheet SKY65387-11 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SKY65313-21 900MHz Transmit/Receive Front-End Module Skyworks
SKY65362-11 High-Power RF Front-End Module Skyworks
SKY65366-21 400 MHz Transmit/Receive Front-End Module Skyworks
SKY65374-11 Active Bias Low-Noise Variable Gain Amplifier Skyworks
SKY65378-11 RF Front-End Module Skyworks

Other Datasheets by Skyworks Solutions

Part Number Description
SKY65313-11 Transmit/Receive Front-End Module
SKY65329-NP 900 MHz Front-End Module
SKY65330 Tx/Rx Front-End Module
SKY65336-11 Transmit/Receive Front-End Module
SKY65337-11 Transmit/Receive Front-End Module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PRELIMINARY DATA SHEET SKY65387-11: 2110-2170 MHz Variable Gain Amplifier Applications • WCDMA base stations • Femto cells Description Skyworks SKY65387-11 is a high linearity, Variable Gain Amplifier (VGA) module. The device includes an input Low-Noise Amplifier (LNA), a variable voltage attenuator, and an output Power Amplifier (PA). The two amplifiers and voltage attenuator are optimized for superior ACLR performance with WCDMA signals. The high linearity (high OP1dB, OIP3, and ACLR) and high efficiency of this device make it ideal for use at the final stage (or close to the final stage) of a WCDMA transmit chain. The output of the first PA (PA1) is matched to the input of the VCA. The output of the VCA is matched to the input of the second PA (PA2).
Published: |