Datasheet4U Logo Datasheet4U.com

XT2063 - Switch Mode Single Li-Ion Battery Charger

Description

The XT2063 is a constant current, constant voltage Li-Ion battery charger that uses a current mode PWM step down switching architecture.

Using DC-DC control mode, the charge current is set by an external resistor, up to 2A.

Features

  • Constant current mode DC-DC PWM control.
  • Constant voltage LDO control.
  • 1.5MHz switching frequency.
  • Anti reverse connection.
  • Automaitc sleep mode for low power consumption.
  • Automatic recharge.

📥 Download Datasheet

Datasheet preview – XT2063

Datasheet Details

Part number XT2063
Manufacturer Silinktek
File Size 297.15 KB
Description Switch Mode Single Li-Ion Battery Charger
Datasheet download datasheet XT2063 Datasheet
Additional preview pages of the XT2063 datasheet.

📁 Similar Datasheet

  • XT2109 - PWM Buck LED Driver (natlinear)
  • XT2109B - PWM Buck LED Driver (natlinear)
  • XT2116 - Fast Turn-on Asymmetric Thyristor (Dynex Semiconductor)
  • XT2116-1001 - Fast Turn-on Asymmetric Thyristor (Dynex Semiconductor)
  • XT2116-1201 - Fast Turn-on Asymmetric Thyristor (Dynex Semiconductor)
  • XT2116-1401 - Fast Turn-on Asymmetric Thyristor (Dynex Semiconductor)
  • XT2116-1601 - Fast Turn-on Asymmetric Thyristor (Dynex Semiconductor)
  • XT2116-801 - Fast Turn-on Asymmetric Thyristor (Dynex Semiconductor)
  • XT2130 - High efficiency PWM control DC-DC boost constant current drive (natlinear)
  • XT214 - SMD Crystal (YIC)
Other Datasheets by Silinktek
  • XT2060 - Programmable Current Linear Charge Management Chip
  • XT2062 - Standalone Li-ion Switch Mode Battery Charger
  • XT2064 - Switch Mode Single Li-Ion Battery Charger
  • XT2051 - 1.0A Compatible With The USB Interface Linear Battery Management
  • XT2052 - 1A Is Compatible With the USB Interface Linear Battery Management
  • XT2054 - Standalone Linear Li-Ion Battery Charger
  • XT2055 - Standalone Linear Li-Ion Battery Charger
  • XT2056 - Single Nickel-Zinc Batteries Charger

Full PDF Text Transcription

Click to expand full text
XT2063 Switch Mode Single Li-Ion Battery Charger  General Description The XT2063 is a constant current, constant voltage Li-Ion battery charger that uses a current mode PWM step down switching architecture. Using DC-DC control mode, the charge current is set by an external resistor, up to 2A. With a 1.5MHz switching frequency, the XT2063 provides small, simple and efficient solution to fast charge single cell Li-Ion battery. When the input voltage is lower than 4.35V, the chip enters the SLEEP MODE, the power consumption will be reduced to 60μA. Built-in temperature protection and load short-circuit protection ensure high reliability of the IC. There are two LED can display various charging states. ■ Features  Constant current mode DC-DC PWM control  Constant voltage LDO control  1.
Published: |