Datasheet4U Logo Datasheet4U.com

SiM3L136-C-GM - MCU

Download the SiM3L136-C-GM datasheet PDF. This datasheet also covers the SiM3L1xx variant, as both devices belong to the same mcu family and are provided as variant models within a single manufacturer datasheet.

Description

5 1.1.3.

ARM Cortex-M3 Reference Manual5 1.2.

Conventions 5 2.

Features

  • - 50 nA current mode with voltage supply monitor enabled - Low-current RTC (180 nA from LFO, 300 nA from crystal) - 4 µs wakeup, register state retention and no reset required from lowest power mode 175 µA/MHz at 3.6 V executing from flash 140 µA/MHz at 3.6 V executing from SRAM Specialized on-chip charge pump reduces power consumption Process/Voltage/Temperature (PVT) Monitor - 32-bit real time clock (RTC) with multiple alarms - Watchdog timer - Low power mode advanced capture counter (ACCTR).

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SiM3L1xx_SiliconLaboratories.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SIM300 AT Commands Set Simcom
SIM300 Hardware Designe Simcom
SIM300C Hardware Design SIM Com
SIM300C AT Commands Set SIM Com
SIM300CZ Hardware Design SIM Com

Other Datasheets by Silicon Laboratories

Part Number Description
SiM3L136-C-GQ MCU
SiM3L134-C-GM MCU
SiM3L144-C-GM MCU
SiM3L146-C-GM MCU
SiM3L146-C-GQ MCU

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SiM3L1xx High-Performance, Low-Power, 32-Bit Precision32™ MCU Family with up to 256 kB of Flash 32-bit ARM Cortex-M3 CPU - 50 MHz maximum frequency - Single-cycle multiplication, hardware division support - Nested vectored interrupt control (NVIC) with 8 priority levels Memory - 32–256 kB flash, in-system programmable - 8–32 kB SRAM with configurable low power retention Clock Sources - Internal oscillator with PLL: 23–50 MHz - Low power internal oscillator: 20 MHz - Low frequency internal oscillator (LFO): 16.
Published: |