Datasheet4U Logo Datasheet4U.com

Si569 - Crystal Oscillator

Description

VC = Voltage Control Pin Selectable via ordering option OE = Output enable; FS = Frequency Select GND = Ground CLK+ = Clock output CLK- = Complementary clock output.

Not used for CMOS.

Features

  • I2C programmable to any frequency from 0.2 to 3000 MHz with < 1 ppb resolution.
  • Ultra low jitter: 100 fs RMS Typ (12 kHz.
  • 20 MHz).
  • Configure up to 2 pin-selectable startup frequencies.
  • I2C interface supports 100 kbps, 400 kbps, and 1 Mbps (Fast Mode Plus).
  • Excellent PSRR and supply noise immunity:.
  • 80 dBc Typ.
  • Programmable Kv (ppm/V) simplifies development.
  • 3.3 V, 2.5 V and 1.8 V VDD supply operation from the same p.

📥 Download Datasheet

Datasheet preview – Si569

Datasheet Details

Part number Si569
Manufacturer Silicon Laboratories
File Size 1.09 MB
Description Crystal Oscillator
Datasheet download datasheet Si569 Datasheet
Additional preview pages of the Si569 datasheet.
Other Datasheets by Silicon Laboratories

Full PDF Text Transcription

Click to expand full text
Ultra Series™ Crystal Oscillator (VCXO) Si569 Data Sheet Ultra Low Jitter I2C Programmable VCXO (100 fs), 0.2 to 3000 MHz The Si569 Ultra Series™ voltage-controlled crystal oscillator utilizes Silicon Laboratories’ advanced 4th generation DSPLL® technology to provide an ultra-low jitter, low phase noise clock at any output frequency. The device is user-programmed via simple I2C commands to provide any frequency from 0.2 to 3000 MHz with <1 ppb resolution and maintains exceptionally low jitter for both integer and fractional frequencies across its operating range. Onchip power supply filtering provides industry-leading power supply noise rejection, simplifying the task of generating low jitter clocks in noisy systems that use switched-mode power supplies.
Published: |