Datasheet4U Logo Datasheet4U.com

SY6702 - Low Voltage H-Bridge IC

Datasheet Summary

Description

The SY6702 is an H-bridge motor driver solution for cameras, consumer products, toys, and other lowvoltage or battery-powered motion-control applications.

The device can drive one winding of a stepper motor or one brush DC motor.

Features

  • H-bridge motor driver.
  • Drives a brush DC motor or one winding of a stepper motor or other loads.
  • Low MOSFET on-resistance: HS + LS < 380mΩ.
  • 1.8A maximum drive current.
  • Power supply voltage range from 2.5V to 16V.
  • PWM (IN/IN) interface.
  • Low power sleep mode with 120nA maximum Combined supply current.
  • Low power with less than 120µA supply current.
  • Internal over current protection, short circuit protection, under voltage lockout and thermal shutdown.

📥 Download Datasheet

Datasheet preview – SY6702

Datasheet Details

Part number SY6702
Manufacturer Silergy
File Size 497.03 KB
Description Low Voltage H-Bridge IC
Datasheet download datasheet SY6702 Datasheet
Additional preview pages of the SY6702 datasheet.

📁 Similar Datasheet

  • SY604 - 125MHz TRIGGER PROGRAMMABLE TIMING EDGE VERNIER (Micrel Semiconductor)
  • SY605 - 125MHz WRITE PROGRAMMABLE TIMING EDGE VERNIER (Micrel Semiconductor)
  • SY6102 - Linear Li-Ion Battery Charger (TPS)
  • SY6500 - 8-Bit Microprocessor (Synertek)
  • SY69753AL - Clock and Data Recovery (Micrel Semiconductor)
  • SY69753L - 155MBPS CLOCK AND DATA RECOVERY (Micrel Semiconductor)
  • SY69754AL - Clock and Data Recovery (Micrel Semiconductor)
  • SY69952 - OC-3/STS-3 CLOCK RECOVERING TRANSCEIVER (Micrel Semiconductor)
Other Datasheets by Silergy
  • SY6280 - 2A Low Loss Power Distribution Switch
  • SY6280A - 2A Low Loss Power Distribution Switch
  • SY6282 - 3A Low Loss Power Distribution Switch
  • SY6283 - Low Loss Power Distribution Load Switch
  • SY6283A - Low Loss Power Distribution Load Switch
  • SY6287C - Low Loss Power Distribution Switch
  • SY6288 - Low Loss Power Distribution Switch
  • SY6307B - 500mA Low Dropout Bias Rail LDO Regulator

Full PDF Text Transcription

Click to expand full text
Application Note: SY6702 Low Voltage H-Bridge IC General Description The SY6702 is an H-bridge motor driver solution for cameras, consumer products, toys, and other lowvoltage or battery-powered motion-control applications. The device can drive one winding of a stepper motor or one brush DC motor. The highly integrated H-bridge driver block consists of two half-bridges with internal logic control, gate drive, over current protection and charge pump circuit. The SY6702 operates with a power-supply voltage range from 2.5V to 16V, and 1.8A maximum output current. To be compatible with industry-standard devices, the SY6702 use the PWM (IN/IN) input interface. The SY6702 provides over current protection, short circuit protection, under voltage lockout and thermal shutdown.
Published: |