Datasheet4U Logo Datasheet4U.com

SD4870A - CURRENT MODE PWM CONTROLLER

Description

SD4870 is a current mode PWM controller IC for high performance, low standby power offline flyback converter application.

In no load or light load condition, the IC operates in Light Load Mode to reduce switching loss and improve efficiency.

Features

  • Frequency shuffling to improve EMI performance.
  • Light Load Mode for minimum standby power.
  • External programmable switching frequency.
  • 3uA low startup current.
  • Internal LEB circuit.
  • VDD over voltage and under voltage protection.
  • Gate output maximum voltage clamp.
  • Over current protection.
  • Over load protection www. DataSheet4U. com.
  • SOT-23-6L/SOP8/DIP8 package.

📥 Download Datasheet

Datasheet Details

Part number SD4870A
Manufacturer Silan Microelectronics
File Size 398.68 KB
Description CURRENT MODE PWM CONTROLLER
Datasheet download datasheet SD4870A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SD484-52-05-301 Photodiode Arrays ETC
SD484XP67K65 CURRENT MODE PWM CONTROLLER SL
SD4863 Dual-Tone Bridge Audio Power Amplifier Chip Zhenda
SD48C BIDIRECTIONAL TVS DIODE Leiditech
SD48D40-06 DC Control Solid-State Relay Teledyne

Other Datasheets by Silan Microelectronics

Part Number Description
SD4870 CURRENT MODE PWM CONTROLLER
SD4870C CURRENT MODE PWM CONTROLLER
SD4870CTR CURRENT MODE PWM CONTROLLER
SD4870TR CURRENT MODE PWM CONTROLLER
SD4871 CURRENT MODE PWM CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CURRENT MODE PWM CONTROLLER DESCRIPTION SD4870 is a current mode PWM controller IC for high performance, low standby power offline flyback converter application. In no load or light load condition, the IC operates in Light Load Mode to reduce switching loss and improve efficiency. Large value startup resistor could be used in the startup circuit to minimize the standby current because of low startup current. SD4870 offers complete protection functions including cycle-bycycle over current protection, over load protection, VDD input voltage over voltage and under voltage protection, etc. Excellent EMI performance is achieved with frequency shuffling technique and soft switching control at the totem pole gate driver output. DIP-8-300-2.54 SOP-8-225-1.
Published: |