Datasheet4U Logo Datasheet4U.com

SLE4432 - (SLE4432 / SLE4442) 256 Byte EEPROM

Download the SLE4432 datasheet PDF. This datasheet also covers the SLE4442 variant, as both devices belong to the same (sle4432 / sle4442) 256 byte eeprom family and are provided as variant models within a single manufacturer datasheet.

Description

.

.

.

.

.

.

Features

  • q 256 × 8-bit EEPROM organization q Byte-wise addressing q Irreversible byte-wise write protection of lowest q q q q q q q q 32 addresses (Byte 0 31) 32 × 1-bit organization of protection memory Two-wire link protocol End of processing indicated at data output Answer-to-Reset acc. to ISO standard 7816-3 Programming time 2.5 ms per byte for both erasing and writing Minimum of 104 write/erase cycles1) Data retention for minimum of ten years1) Contact configuration and serial interface in accorda.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SLE4442_Siemens.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SLE4432 (SLE44xx) ICs for Chip Cards Siemens Semiconductor Group
SLE4436 Security & Chip Card ICs Infineon Technologies AG
SLE4436E Security & Chip Card ICs Infineon Technologies AG
SLE4406S Security & Chip Card ICs Infineon Technologies AG
SLE4406SE Security & Chip Card ICs Infineon Technologies AG

Other Datasheets by Siemens Semiconductor Group (now Infineon)

Part Number Description
SLE4442 (SLE4432 / SLE4442) 256 Byte EEPROM
SLE24C01 Standard EEPROM
SLE24C02 Standard EEPROM
SLE24C04 4 Kbit (512 x 8 bit) Serial CMOS-EEPROM
SLE24C08 8/16 Kbit (1024/2048 x 8 bit) Serial CMOS-EEPROM

Full PDF Text Transcription

Click to expand full text
ICs for Chip Cards Intelligent 256-Byte EEPROM SLE 4432/SLE 4442 Data Sheet 07.95 Semiconductor Group -1 Edition 07.95 This edition was realized using the software system FrameMaker‚. Published by Siemens AG, Bereich Halbleiter, MarketingKommunikation, Balanstraße 73, 81541 München © Siemens AG 1995. All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved.
Published: |