Datasheet4U Logo Datasheet4U.com

LH1298 - HIGH VOLTAGE/ SOLID STATE RELAY OPTOCOUPLER

Description

The LH1298 is a single pole single throw (SPST), normally closed (NC), solid state relay.

The relay can control AC or DC loads currents up to 100 mA, with a supply voltage up to 350 V.

The device is packaged in a six pin 0.3 inch dual-in line package.

Features

  • Normally Closed, Single Pole Single Throw Operation.
  • Control 350 VAC or DC Voltage.
  • Switch 100 mA Loads.
  • LED Control Current, 1.5 mA.
  • Low ON-Resistance.
  • dv/dt, >500 V/ms.
  • Isolation Test Voltage, 3750 VACRMS.
  • Current Limiting.
  • Underwriters Lab File # E52744.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LH1262C Dual Photovoltaic MOSFET Driver Solid State Relay Vishay Siliconix
LH1262CAC Dual Photovoltaic MOSFET Driver Solid State Relay Vishay Siliconix
LH1262CACTR Dual Photovoltaic MOSFET Driver Solid State Relay Vishay Siliconix
LH1262CB Dual Photovoltaic MOSFET Driver Solid State Relay Vishay Siliconix
LH1263 Signaling Circuit Agere Systems

Other Datasheets by Siemens Semiconductor Group (now Infineon)

Part Number Description
LH1056 HIGH VOLTAGE/ SOLID STATE RELAY OPTOCOUPLER
LH1061AAC High-Voltage/ Solid-State Relay
LH1061AB High-Voltage/ Solid-State Relay
LH1540 HIGH VOLTAGE/ SOLID STATE RELAY OPTOCOUPLER
LH1550 HIGH VOLTAGE/ SOLID STATE RELAY OPTOCOUPLER

Full PDF Text Transcription

Click to expand full text
LH1298 HIGH VOLTAGE, SOLID STATE RELAY OPTOCOUPLER FEATURES • Normally Closed, Single Pole Single Throw Operation • Control 350 VAC or DC Voltage • Switch 100 mA Loads • LED Control Current, 1.5 mA • Low ON-Resistance • dv/dt, >500 V/ms • Isolation Test Voltage, 3750 VACRMS • Current Limiting • Underwriters Lab File # E52744 APPLICATIONS • Telephone Switch Hook • High Voltage Test Equipment • TRIAC Driver • Motor Control • Industrial Control Systems DESCRIPTION The LH1298 is a single pole single throw (SPST), normally closed (NC), solid state relay. The relay can control AC or DC loads currents up to 100 mA, with a supply voltage up to 350 V. The device is packaged in a six pin 0.3 inch dual-in line package. This package offers an insulation dielectric withstand of 3750 VACRMS.
Published: |