Datasheet4U Logo Datasheet4U.com

SR12 - Low Capacitance TVS Diode Array

Description

RailClamps are surge rated diode arrays designed to protect high speed data interfaces.

Features

  • ‹ Transient protection for high speed data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 0.5kV, 12A (8/20µs) ‹ Array of surge rated diodes with internal TVS Diode ‹ Protects two I/O lines ‹ Operating Voltage: 12 volts ‹ Low capacitance (5pF typical) for high-speed interfaces ‹ Low clamping voltage ‹ Solid-state silicon-avalanche technology Mechanical Characteristics ‹ JEDEC SOT-143 package ‹ UL 497B listed ‹ Molding compound f.

📥 Download Datasheet

Datasheet preview – SR12

Datasheet Details

Part number SR12
Manufacturer Semtech
File Size 176.08 KB
Description Low Capacitance TVS Diode Array
Datasheet download datasheet SR12 Datasheet
Additional preview pages of the SR12 datasheet.

📁 Similar Datasheet

  • SR12 - SCHOTTKY BARRIER RECTIFIERS (Mospec Semiconductor)
  • SR12 - 1A Leaded Type Schottky Barrier Rectifiers (CITC)
  • SR120 - 1A Schottky Barrier Rectifiers (UPM)
  • SR120 - Schottky Rectifier (Yangzhou Yangjie)
  • SR120 - SCHOTTKY BARRIER RECTIFIER (Suntan)
  • SR120 - SCHOTTKY BARRIER RECTIFIER (Rectron Semiconductor)
  • SR120 - 1.0 AMP SCHOTTKY BARRIER RECTIFIERS (Formosa MS)
  • SR120 - SchottkyBarrier Rectifiers (Eris)
  • SR120 - 1.0A SCHOTTKY BARRIER DIODE (WON-TOP)
  • SR120 - SCHOTTKY BARRIER RECTIFIER (MIC)
Other Datasheets by Semtech

Full PDF Text Transcription

Click to expand full text
PROTECTION PRODUCTS Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR12 has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltages caused by ESD (electrostatic discharge), EFT (electrical fast transients), and lightning. The unique design of the SR12 incorporates four surge rated, low capacitance steering diodes and a TVS diode in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents over-voltage on the power line, protecting any downstream components.
Published: |