SC4250 Datasheet PDF (Negative Voltage / Hot Swap Controller)

SC4250 - Negative Voltage / Hot Swap Controller

Description

The SC4250 is a negative voltage hotswap controller that allows the insertion of line cards into a live backplane.

The inrush current is programmable, and the closed loop operation limits the maximum current even under short circuit conditions.

A built-in timing circuit prevents false shutdown.

Features

Programmable slew of the inrush current when used for hot insertion in the negative 24V and 48V backplane Closed loop operation limits the maximum current even in short circuit condition Built in timer prevents false shutdown when the closed loop operation limits the current Sensing the drain voltage allows for immediate shutdown in short circuit conditions where current spikes and noise are ignored Power good signal Input UVLO and OVLO sensing Circuit breaker and retry SO-8 pack.

Datasheet Details

Part number	SC4250
Manufacturer	Semtech
File Size	252.19 KB
Description	Negative Voltage / Hot Swap Controller
Datasheet	SC4250 Datasheet
Additional preview pages of the SC4250 datasheet.

📁 Similar Datasheet

SC42584 - (SC42584 - SC42585) Bubble Memory Controllers (Motorola Semiconductor)

SC42585 - (SC42584 - SC42585) Bubble Memory Controllers (Motorola Semiconductor)

SC420 - Synchronous Power MOSFET Driver (Semtech Corporation)

SC4205 - Very Low Dropout 1 Amp Regulator (Semtech Corporation)

SC420A - Synchronous Power MOSFET Driver (Semtech Corporation)

SC4211 - Very Low Input /Very Low Dropout 1 Amp Regulator (Semtech Corporation)

SC4215 - Very Low Input / Very Low Dropout 2 Amp Regulator With Enable (Semtech Corporation)

SC4215A - Very Low Input / Very Low Dropout 2 Amp Regulator With Enable (Semtech Corporation)

SC4216 - Very Low Input /Very Low Dropout 3 Amp Regulator (Semtech Corporation)

SC4217 - Very Low Input /Very Low Dropout 3 Amp Regulator (Semtech Corporation)

Full PDF Text Transcription

Click to expand full text

Negative Voltage Hot Swap Controller POWER MANAGEMENT Description The SC4250 is a negative voltage hotswap controller that allows the insertion of line cards into a live backplane. The inrush current is programmable, and the closed loop operation limits the maximum current even under short circuit conditions. A built-in timing circuit prevents false shutdown. The signal from the drain voltage is fed to the timer, providing safety for the MOSFET when in linear mode. The SC4250 latches off under abnormal conditions The power has to be recycled in order to resume operation. The device comes in two options, PWRGD (SC4250H) and PWRGD (SC4250L). These high or low signals can be directly used to enable power modules.

Published: Oct 1, 2005 |