Datasheet4U Logo Datasheet4U.com

RClamp2451ZA - 24V ESD Protection

Datasheet Summary

Description

RailClamp® TVS diodes are ultra low capacitance devices designed to protect sensitive electronics from damage or latch-up due to ESD, EFT, and EOS.

They are designed for use on high speed ports in applications such as cell phones, notebook computers, and other portable electronics.

Features

  • extremely good ESD protection characteristics including a low typical dynamic resistance of 0.16 Ohms (typical), low peak ESD clamping voltage, and high ESD withstand voltage (+/-14kV contact per IEC 61000-4-2). Low typical capacitance (0.35pF at VR=0V) means that RClamp2451ZA will not create harmonic distortion in the RF signal. This device is bidirectional and has a working voltage of 24V for use on NFC resonator circuits without signal clipping. RClamp2451ZA is in a 2-pin SLP0603P2X3F package.

📥 Download Datasheet

Datasheet preview – RClamp2451ZA

Datasheet Details

Part number RClamp2451ZA
Manufacturer Semtech
File Size 265.19 KB
Description 24V ESD Protection
Datasheet download datasheet RClamp2451ZA Datasheet
Additional preview pages of the RClamp2451ZA datasheet.

📁 Similar Datasheet

  • RCLAMP2402B - Ultra-Low Capacitance TVS (Semtech Corporation)
  • RCLAMP2504N - 2.5V & 3.3V TVS Arrays (Semtech Corporation)
  • RCLAMP2504P - (RCLAMP2504P / RCLAMP3304P) 2.5V & 3.3V TVS Arrays (Semtech Corporation)
  • RCLAMP0502A - Low Capacitance TVS Array (Semtech Corporation)
  • RCLAMP0502N - Low Capacitance TVS Array (Semtech Corporation)
  • RCLAMP0503F - TVS Array (Semtech Corporation)
  • RCLAMP0503N - TVS Array (Semtech Corporation)
  • RCLAMP0504N - TVS Array (Semtech Corporation)
  • RCLAMP0504P - TVS Diode (Leiditech)
  • RCLAMP0504S - TVS Array (Semtech Corporation)
Other Datasheets by Semtech

Full PDF Text Transcription

Click to expand full text
PROTECTION PRODUCTS - RailClamp® Description RailClamp® TVS diodes are ultra low capacitance devices designed to protect sensitive electronics from damage or latch-up due to ESD, EFT, and EOS. They are designed for use on high speed ports in applications such as cell phones, notebook computers, and other portable electronics. These devices offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. RClamp®2451ZA is specifically designed for protection of Near Field Communications (NFC) interfaces. It features extremely good ESD protection characteristics including a low typical dynamic resistance of 0.
Published: |