Datasheet4U Logo Datasheet4U.com

SX1701B - single-ended to differential conversion

Description

The SX1701B is an integrated LNA operating over a wide frequency range from 40 MHz to 2.5 GHz.

It is optimized for high OIP2 and OIP3 with minimum current consumption.

It also performs a single-ended to differential conversion.

Features

  • Single-ended input / Dual differential outputs Independent programmable gain for each channel: 6, 12 and 18 dB High Linearity: OIP2 of 57 dBm and OIP3 of 22 dBm Noise Figure of 7 dB 75 Ω Input impedance 100 Ω differential output impedance Current consumption of 130 mA with one channel enabled ESD protection (Normal ESD handling procedures should be observed) Very small package: MLPQ-16, 4 mm x 4 mm (equival.

📥 Download Datasheet

Datasheet Details

Part number SX1701B
Manufacturer SEMTECH
File Size 558.07 KB
Description single-ended to differential conversion
Datasheet download datasheet SX1701B Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SX1710 Broadband High Efficiency RF Power Amplifier Semtech
SX1781 PLL Frequency Synthesizer Semtech
SX1208 Low Power Integrated UHF Transceiver Semtech
SX1231H Low Power Integrated UHF Transceiver Semtech
SX1238 Fully Integrated Transceiver Semtech

Other Datasheets by SEMTECH

Part Number Description
SX1701 single-ended to differential conversion
SX1701A single-ended to differential conversion
SX1210 Ultra-Low Power Integrated UHF Receiver
SX1211 Ultra-Low Power Integrated UHF Transceiver
SX1212 Ultra-Low Power Integrated 300-510MHz Transceiver

Full PDF Text Transcription

Click to expand full text
SX1701B ADVANCED COMMUNICATION & SENSING PRODUCTS www.DataSheet4U.com SX1701B – Datasheet Highly linear wideband LNA Multi-channel, single-ended to differential conversion GENERAL DESCRIPTION The SX1701B is an integrated LNA operating over a wide frequency range from 40 MHz to 2.5 GHz. It is optimized for high OIP2 and OIP3 with minimum current consumption. It also performs a single-ended to differential conversion. Two independent output channels are available and the gain of each may be adjusted independently.
Published: |