Datasheet4U Logo Datasheet4U.com

SC1631 - LOW VOLTAGE STEP-UP DC-DC CONVERTER

General Description

The SC1631 is a high efficiency step up DC-DC converter.

Only four external components are required to deliver a fixed voltage of 3V, 3.3V, or 5V.

Efficiency beyond 87% can be easily achieved at 100mA load with 2.2V to 3V input voltages.

Key Features

  • High efficiency 90%.
  • Power-saving shutdown mode (7µA typical).
  • Internal 2A switch.
  • 120kHz switching rate.
  • Adjustable switch current limit.
  • On-chip low battery detector.

📥 Download Datasheet

Datasheet Details

Part number SC1631
Manufacturer SEMTECH
File Size 168.66 KB
Description LOW VOLTAGE STEP-UP DC-DC CONVERTER
Datasheet download datasheet SC1631 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC16312 1/4 to 1/11 Duty VFD Controller FUMAN ELECTRONICS
SC16312 VFD CONTROLLER/DRIVER Silan Microelectronics
SC16312L VFD CONTROLLER/DRIVER Silan Microelectronics
SC16313 VFD CONTROLLER / DRIVER Silan Microelectronics
SC16315 VFD CONTROLLER/DRIVER Silan Microelectronics

Other Datasheets by SEMTECH

Part Number Description
SC1630 LOW VOLTAGE MULTI-MODE DC-DC CONVERTER
SC1633 LOW VOLTAGE STEP-UP DC-DC CONVERTER
SC1628 HIGH-EFFICIENCY STEP-UP DC-DC CONVERTER
SC1650 HIGH-VOLTAGE INVERTING DC-DC CONVERTER
SC1652 MICROPOWER INVERTING DC-DC CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LOW VOLTAGE STEP-UP DC-DC CONVERTER January 29, 1998 SC1631 TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION The SC1631 is a high efficiency step up DC-DC converter. Only four external components are required to deliver a fixed voltage of 3V, 3.3V, or 5V. Efficiency beyond 87% can be easily achieved at 100mA load with 2.2V to 3V input voltages. A logic-controlled shutdown mode is provided for power saving. Switch current limit can be programmed with a resistor. The low battery detector can be configured as a linear regulator or a burst mode controller providing extremely low supply current operation. A switching rate of 120kHz reduces the inductor size inductors of 25µH to 50µH are recommended for most applications.