Datasheet4U Logo Datasheet4U.com

RCLAMP0544M - ESD Protection

General Description

RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces.

Key Features

  • ‹ ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ±18kV (air), ±12kV (contact) IEC 61000-4-5 (Lightning) 5A (8/20µs) IEC 61000-4-4 (EFT) 40A (5/50ns) Array of surge rated diodes with internal TVS Diode Small package saves board space Protects four I/O lines and one Vcc line Low capacitance: 0.3pF typical (I/O to I/O) Low clamping voltage Low operating voltage: 5.0V Solid-state silicon-avalanche technology RClamp0544M ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ Mechanical Character.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RCLAMP0502B Ultra Low Capacitance TVS Semtech
RCLAMP0504F Low Capacitance TVS Array Semtech
RClamp0504FB 5V TVS Semtech
RCLAMP0504M Low Capacitance TVS Diode Array Semtech
RCLAMP0504P Low Capacitance TVS Array Semtech

Other Datasheets by SEMTECH

Part Number Description
RCLAMP0502A Low Capacitance TVS Array
RCLAMP0502N Low Capacitance TVS Array
RCLAMP0503F TVS Array
RCLAMP0503N TVS Array
RCLAMP0504N TVS Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PRODUCTS - RailClamp PROTECTION www.DataSheet4U.com Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The RClampTM0544M has a typical capacitance of only 0.30pF. This means it can be used on circuits operating in excess of 2GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge). These devices are in a MSOP 10L package and feature a lead-free, matte tin finish.