Datasheet4U Logo Datasheet4U.com

S93C66A - CMOS SERIAL E2PROM

Download the S93C66A datasheet PDF. This datasheet also covers the S93C56 variant, as both devices belong to the same cmos serial e2prom family and are provided as variant models within a single manufacturer datasheet.

Features

  • Low power consumption Standby : 1.0 µA Max. (VCC=5.5 V) Operating : 0.8 mA Max. (VCC=5.5 V) : 0.4 mA Max. (VCC=2.5 V) y Wide operating voltage range Read/Write : 1.8 to 5.5 V y Sequential read capable y Endurance : 106 cycles/word y Data retention : 10 years y S-93C46A : 1K bits NM93CS46 instruction code compatible y S-93C56A : 2K bits NM93CS56 instruction code compatible y S-93C66A : 4K bits NM93CS66 instruction code compatible.
  • Packages y 8-pin DIP (PKG drawing code : DP008-A) y 8-.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (S93C56_SeikoInstruments.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
S9318 Nonvolatile DACPOT Electronic Potentiometer ETC
S9318S Nonvolatile DACPOT Electronic Potentiometer ETC
S9345 Si PIN photodiode Hamamatsu Corporation
S93462 (S93462 / S93463) Precision Supply-Voltage Monitor and Reset Controller Summit Microelectronics
S93463 (S93462 / S93463) Precision Supply-Voltage Monitor and Reset Controller Summit Microelectronics

Other Datasheets by Seiko Instruments

Part Number Description
S93C66B (S93Cx6B) CMOS SERIAL E2PROM
S93C46A CMOS SERIAL E2PROM
S93C46B (S93Cx6B) CMOS SERIAL E2PROM
S93C56A CMOS SERIAL E2PROM
S93C56B (S93Cx6B) CMOS SERIAL E2PROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Rev. 2.3_00 CMOS SERIAL E2PROM S-93C46A/56A/66A The S-93C46A/56A/66A is high speed, low power 1K/2K/4K-bit E 2 PROM with a wide operating voltage range. It is organized as 64-word ×16-bit, 128-word×16-bit, 256-word×16-bit, respectivly. Each is capable of sequential read, at which time addresses are automatically incremented in 16-bit blocks. The instruction code is compatible with the NM93CS46/56/66. „ Features y Low power consumption Standby : 1.0 µA Max. (VCC=5.5 V) Operating : 0.8 mA Max. (VCC=5.5 V) : 0.4 mA Max. (VCC=2.5 V) y Wide operating voltage range Read/Write : 1.8 to 5.
Published: |