Datasheet4U Logo Datasheet4U.com

S-882Z - ULTRA-LOW VOLTAGE OPERATION CHARGE PUMP

Description

Output pin (step-up DC-DC converter connection pin) GND pin Step-up DC-DC converter output voltage monitor pin Power supply input pin Startup capacitor connection pin 1 2 3 Figure 2 Absolute Maximum Ratings Table 3 Parameter VIN pin voltage CPOUT pin voltage OUT pin voltage VM pin vo

Features

  • s.
  • Operating input voltage.
  • Current consumption.
  • Discharge start voltage Shutdown voltage Oscillation frequency Small package External component Lead-free products 0.3 to 3.0 V During operation : 0.5 mA max. (at VIN = 0.3 V) During shutdown : 0.6 µA max. (at VIN = 0.3 V) 1.8 to 2.4 V (selectable in 0.2 V steps) Discharge start voltage + 0.1 V (fixed) 350 kHz typ. (at VIN = 0.3 V) SOT-23-5 package Startup capacitor (CCPO.

📥 Download Datasheet

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr Rev.1.2_00 ULTRA-LOW VOLTAGE OPERATION CHARGE PUMP IC FOR STEP-UP DC-DC CONVERTER STARTUP S-882Z Series The S-882Z Series is a charge pump IC for step-up DC-DC converter startup, which differs from conventional charge pump ICs, in that it uses fully depleted SOI (Silicon on Insulator) technology to enable ultra-low voltage operation. Being capable of stepping up an extremely low input voltage of 0.3 to 0.35 V, this series enables the efficient use of very low energy levels. The stepped up electric power is stored in a startup capacitor, and it is discharged as the startup power of the step-up DC-DC converter when the startup capacitor reaches the discharge start voltage level.
Published: |