Datasheet4U Logo Datasheet4U.com

LC8904 - Digital Audio Interface Receiver

Features

  • Synchronizes with the transmitted EIAJ format signal using a built-in PLL circuit.
  • Modes are set up and codes are output according to commands sent over a microprocessor interface.
  • Input pin and output data format setup.
  • Selection of digital source mode or analog source mode.
  • 32-bit channel status output (consumer product mode 0).
  • 80-bit subcode Q data output (CRC check included).
  • Either a 384fs or a 512fs clock can be selected as.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC89052T Digital Audio Interface Receiver Sanyo Semicon Device
LC89052TA-E Digital Audio Interface Receiver Sanyo Semicon Device
LC89057W-VF4A-E Digital Audio Interface Receiver ON Semiconductor
LC89057W-VF4A-E Digital Audio Interface Transceiver Sanyo Semicon Device
LC89058W-E Digital Audio Interface Receiver Sanyo Semicon Device

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LC8904Q Digital Audio Interface Receiver
LC8900KQ Digital Audio Interface Receiver
LC8901 Digital Audio Interface Receiver
LC8901Q Digital Audio Interface Receiver
LC8902 Digital Audio Interface Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN*5014B CMOS LSI LC8904Q Digital Audio Interface Receiver Preliminary Overview The LC8904Q demodulates data transmitted between digital audio equipment in the EIAJ format (CP-1201) to a normal format signal synchronized with the receiving side input signal. Package Dimensions unit: mm 3156-QFP48E [LC8904Q] Features • Synchronizes with the transmitted EIAJ format signal using a built-in PLL circuit. • Modes are set up and codes are output according to commands sent over a microprocessor interface.
Published: |