Datasheet4U Logo Datasheet4U.com

LB1981V - Three-Phase Brushless Motor Driver

Description

Pin number Pin name STBY 3 Pin voltage VCC1 max

Pin function When this pin is at 0.7V or less or when it is open, only the FG/PG amplifier operates.

In the motor drive state, the pin should be at 2V or higher.

Features

  • Three-phase full-wave drive brushless sensorless motor drive.
  • Soft switching drive.
  • Power-saving speed control function due to motor voltage.
  • Use with 3V power supply possible.
  • Output residual voltage can be set in 4 ways.
  • Forward/reverse switching possible.
  • Built-in standby function (FG and PG amplifier only remain operative).
  • Built-in braking circuit.
  • Built-in thermal shutdown circuit.
  • Built-in FG and PG.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LB1988N Three-Phase Sensorless Motor Driver Loading Motor Driver Sanyo Semicon Device
LB1909M Stepping Motor Driver IC ON Semiconductor
LB1909MC Stepping Motor Driver IC ON Semiconductor
LB190E01-SL01 LCD LG
LB190E02-SL01 SXGA TFT LCD LG

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LB1981 Three-Phase Brushless Motor Driver
LB1980 3-Phase Brushless Motor Driver
LB1980H Three-Phase Brushless Motor Driver
LB1987 Three-Phase Brushless Motor Driver
LB1987D Three-Phase Brushless Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : ENN5917 LB1981V Monolithic Digital IC LB1981V Three-Phase Brushless Motor Driver Overview The LB1981V is a three-phase brushless motor driver especially suited for use mainly with drum motors of portable VCRs. Package Dimensions unit: mm 3191-SSOP30 30 16 Features • Three-phase full-wave drive brushless sensorless motor drive • Soft switching drive • Power-saving speed control function due to motor voltage • Use with 3V power supply possible • Output residual voltage can be set in 4 ways • Forward/reverse switching possible • Built-in standby function (FG and PG amplifier only remain operative) • Built-in braking circuit • Built-in thermal shutdown circuit • Built-in FG and PG amplifiers • Built-in saturation prevention amplifier and midpoint control circuit 5.6 7.
Published: |