Datasheet4U Logo Datasheet4U.com

STK672-740A-E - 2-phase Stepping Motor Driver

Features

  • Built-in overcurrent detection function (output current OFF).
  • Built-in overheat detection function (output current OFF).
  • If either overcurrent or overheat detection function is activated, the FAULT signal (active low) is output.
  • Built-in power on reset function.
  • Phase signal input driver activated with an active Low and incorporates a simultaneous ON prevention function.
  • Supports schmitt input for 2.5V high level input.
  • Incorp.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
STK672-740A-E Two-Phase Stepping Motor Driver ON Semiconductor
STK672-740AN-E 2-phase Stepper Motor Driver ON Semiconductor
STK672-732AN-E 2-phase Stepper Motor Driver ON Semiconductor
STK672-050-E Stepping Motor Driver ON Semiconductor
STK672-110-E Two-Phase Stepping Motor Driver ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
STK672-730A-E 2-phase Stepping Motor Driver
STK672-732A-E 2-phase Stepping Motor Driver
STK672-010 Thick-Film Hybrid IC
STK672-020 Unipolar Fixed-Current Chopper
STK672-040 Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A)

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA1136B STK672-740A-E Overview Thick-Film Hybrid IC 2-phase Stepping Motor Driver The STK672-740A-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • Built-in overcurrent detection function (output current OFF). • Built-in overheat detection function (output current OFF). • If either overcurrent or overheat detection function is activated, the FAULT signal (active low) is output. • Built-in power on reset function. • Phase signal input driver activated with an active Low and incorporates a simultaneous ON prevention function. • Supports schmitt input for 2.5V high level input. • Incorporating a current detection resistor (0.
Published: |