Datasheet4U Logo Datasheet4U.com

LE24LB642CS - Two Wire Serial Interface EEPROM

Description

4 5 6 PIN.2 PIN.3 PIN.4 3 2 1 PIN.5 PIN.6 1.50 x 1.06 x 0.50(max) Block Diagram WP SCL Input buffer Condition detector Serial controller Write controller High voltage generator Address generator X decoder EEPROM Array SDA I/O buffer Y decoder & Sense AMP Serial-parallel converter

Features

  • ion, it generates an acknowledge signal. After this, if it receives 3.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA1464A CMOS IC LE24LB642CS Overview Two Wire Serial Interface EEPROM (64k EEPROM) The LE24LB642CS is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by incorporating SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol, therefore it is best suited for application that requires small-scale re-writable nonvolatile parameter memory. Functions • Capacity: 64k bits (8k × 8 bits) • Single supply voltage: 1.7V to 3.6V • Interface: Two wire serial interface (I2C Bus*) • slave addresses: S2=0, S1=0, S0=0 • Operating clock frequency: 400kHz • Low power consumption : Standby: 2μA (max) : Active (Read): 0.
Published: |