Datasheet4U Logo Datasheet4U.com

LC7574NW - 1/2 Duty VFD Driver

Description

1.

Consider the examples shown in Figure 4, where data is set up so that the segment outputs S1 to S37 output a low level on the G1 digit output timing and a high level on the G2 digit output timing.

(Here, the G2 side being lighted) 2.

Features

  • 74 segment outputs.
  • Noise reduction circuits are built into the output drivers.
  • Serial data input supports CCB.
  • format communications with the system controller.
  • Switching between digital and analog dimmers under serial data control.
  • High generality since display data is displayed without the intervention of a decoder.
  • All segments can be turned off with the BLK pin SANYO: QFP48E.
  • CCB is a trademark of SANYO.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN3586A CMOS LSI LC7574NE, 7574NW 1/2 Duty VFD Driver for Frequency Display Overview The LC7574NE and LC7574NW are 1/2 duty VFD drivers that can be used for electronic tuning frequency display and other applications under the control of a controller. These products can directly drive VFDs with up to 74 segments. Package Dimensions unit: mm 3156-QFP48E [LC7574NE] Features • 74 segment outputs • Noise reduction circuits are built into the output drivers. • Serial data input supports CCB* format communications with the system controller.
Published: |