Datasheet4U Logo Datasheet4U.com

89170M - LC89170M

Description

Subcode interface The LC89170M accepts subcode data from the DSP using the EXCK, SBSO, SCOR, and WFCK pins.

Figure 1 shows the timing.

SW1 sets the input or output state for the EXCK pin.

Features

  • Accepts the channel R to W subcode data through a subcode interface.
  • Can continuously output the channel R to W data for each 1PACK24 symbol.
  • Performs error detection (cyclic redundancy code) and outputs both the data and the result of that check.
  • Provides synchronization protection for the subcode interface.
  • Supports low-voltage operation (3.3 V).
  • Provided in the miniature MFP-14S package. SANYO: MFP14S Specifications Absolute Maximum.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by SANYO (now Panasonic)

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN*5536A CMOS LSI LC89170M CD Player Text Data IC Preliminary Overview The LC89170M is an IC that decodes the text data, such as song names, stored in subcode channels R to W of a compact disk’s read-in area. Package Dimensions unit: mm 3111-MFP14S [LC89170M] Features • Accepts the channel R to W subcode data through a subcode interface. • Can continuously output the channel R to W data for each 1PACK24 symbol. • Performs error detection (cyclic redundancy code) and outputs both the data and the result of that check. • Provides synchronization protection for the subcode interface. • Supports low-voltage operation (3.3 V) • Provided in the miniature MFP-14S package.
Published: |