Datasheet4U Logo Datasheet4U.com

KA2428 - TONE RINGER WITH BRIDGE DIODE

Key Features

  • Built-in full wave bridge diode rectifier.
  • Low current consumption, in order to allow the parallel operation of the 4 devices.
  • Few external components.
  • Tone and adjustable switching frequencies by external components.
  • High noise immunity due to built-in voltage to current hysteresis.
  • Adjustable activation voltage.
  • Internal zener diodes to protect against over voltages.
  • Adjustable ringer impedance with external components.

📥 Download Datasheet

Full PDF Text Transcription for KA2428 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for KA2428. For precise diagrams, and layout, please refer to the original PDF.

KA2418B/28 INTRODUCTION TONE RINGER WITH BRIDGE DIODE The KA2418B/28 is a monolithic integrated circuit telephone tone ringer with bridge diode, when coupled with an appr...

View more extracted text
uit telephone tone ringer with bridge diode, when coupled with an appropriate transducer, it replaces the electromechanical bell. This device is designed for use with either a piezo transducer or an inexpensive transformer coupled speaker to produce a pleasing tone composed of a high frequencys (fH1, fH2) alternating with a low frequency (fS) resulting in a warble frequency. The supply voltage is obtained from the AC ring signal and the circuit is designed so that noise on the line or variation of the ringing signal can not affect correct operation of the device.

More Datasheets from Samsung Semiconductor

Part Number Description
KA2425A SPEECH NETWORK WITH DIALER INTERFACE
KA2401 DC MOTOR SPEED CONTROLLER
KA2402 DC MOTOR SPEED CONTROLLER
KA2404 DC MOTOR SPEED CONTROLLER
KA2404A DC MOTOR SPEED CONTROLLER
KA2407 DC MOTOR SPEED CONTROLLER
KA2410 THE KA2410/KA2411 IS A BIPOLAR INTEGRATED CIRCUIT DESIGNED FOR TELEPHONE BELL REPLACEMENT
KA2411 THE KA2410/KA2411 IS A BIPOLAR INTEGRATED CIRCUIT DESIGNED FOR TELEPHONE BELL REPLACEMENT
KA2418B TONE RINGER WITH BRIDGE DIODE
KA248 QUAD OPERATIONAL AMPLIFIER