Datasheet4U Logo Datasheet4U.com

S6A2067 - 40 CH SEGMENT/COMMON DRIVER FOR DOT MATRIX LCD

Description

PIN (NO.) VDD(42) VSS(GND)(36) VEE(31) V1, V2 (32, 33) V3, V4 (34,35) S1 - S40 SHL1(38) Input Output Input Part 1 Input I/O Power Name Operating Voltage Description For logical circuit (2.7 - .5V) 0V (GND) Interface Power Supply Negative Supply Voltage LCD driver output voltage level For LCD d

Features

  • Display driving bias: static ~ 1/5 Power supply voltage: 2.7V to 5.5V Supply voltage for display: 3.0V to 13.0V (VLCD = VDD - VEE) Interface Driver (cascade connection) S6A0065, Other S6A2067.
  • Controller S6A0069 S6A0070 S6A0073 CMOS Process 100QFP or bare chip available 1 S6A2067 80.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S6A 6 Amp Silicon Rectifier 50 to 1000 Volts Micro Commercial Components
S6A13 Thyristor Silicon Planar Type Toshiba
S6AE101A Energy Harvesting PMIC Cypress Semiconductor

Other Datasheets by Samsung Semiconductor

Part Number Description
S6A2068 16COM/60SEG DRIVER & CONTROLLER
S6A0031 8 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD
S6A0032 16 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD
S6A0035 53 SEGMENT STATIC DRIVER
S6A0065 40 CH SEGMENT/COMMON DRIVER FOR DOT MATRIX LCD

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
80 SEGMENT DRIVER FOR DOT MATRIX LCD S6A2067 INTRODUCTION The S6A2067 is a LCD driver lC which is fabricated by low power CMOS technology. Basically this lC consists of 40 x 2 bit bi-directional shift register, 40 x 2 bit data latch and 40 x 2 bit LCD driver (refer to Figure 1). This lC can be used as segment driver. FUNCTION • • Dot matrix LCD driver with 80 channel output. Input / Output signal - Output: 40 x 2 channel waveform for LCD driving - Input: Serial display data and control signal pulse from the controller lC. Bias voltage (V1 to V4) FEATURES • • • • Display driving bias: static ~ 1/5 Power supply voltage: 2.7V to 5.5V Supply voltage for display: 3.0V to 13.
Published: |