Datasheet4U Logo Datasheet4U.com

S524A60X81 - 1K/2K/4K/8K/16K-bit Serial EEPROM

Description

Name A0, A1, A2 Type Input Description Input pins for device address selection.

To configure a device address, these pins should be connected to the VCC or VSS of the device.

These pins are internally pulled down to VSS.

Features

  • I2C-Bus Interface.
  • Two-wire serial interface Automatic word address increment.
  • Operating Characteristics.
  • Operating voltage.
  • 1.8 V to 5.5 V Operating current.
  • Maximum write current: < 3 mA at 5.5 V.
  • Maximum read current: < 200 µA at 5.5 V.
  • Maximum stand-by current: < 1 µA at 5.5 V.
  • Operating temperature range.
  • 25°C to + 70°C (commercial).
  • 40°C to + 85°C (industrial).
  • O.

📥 Download Datasheet

Datasheet preview – S524A60X81

Datasheet Details

Part number S524A60X81
Manufacturer Samsung Semiconductor
File Size 124.54 KB
Description 1K/2K/4K/8K/16K-bit Serial EEPROM
Datasheet download datasheet S524A60X81 Datasheet
Additional preview pages of the S524A60X81 datasheet.

📁 Similar Datasheet

  • S520U - 5.0AMP SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER (XINNUO)
  • S5210 - Thyristors (RCA)
  • S5210B - Thyristors (RCA)
  • S5210D - Thyristors (RCA)
  • S5210M - Thyristors (RCA)
  • S5215M - Low Drop Output Voltage Regulator (AUK)
  • S5218M - Low Drop Output Voltage Regulator (AUK)
  • S5225M - Low Drop Output Voltage Regulator (AUK)
  • S5228M - Low Drop Output Voltage Regulator (AUK)
  • S5230M - Low Drop Output Voltage Regulator (AUK)
Other Datasheets by Samsung semiconductor

Full PDF Text Transcription

Click to expand full text
S524A40X11/40X21/ 40X41/60X81/60X51 1K/2K/4K/8K/16K-bit Serial EEPROM for Low Power Data Sheet OVERVIEW The S524A40X11/40X21/40X41/60X81/60X51 serial EEPROM has a 1,024/2,048/4,096/8,192/16,384-bit capacity, supporting the standard I2C™-bus serial interface. It is fabricated using Samsung’s most advanced CMOS technology. It has been developed for low power and low voltage applications (1.8 V to 5.5 V). One of its major feature is a hardware-based write protection circuit for the entire memory area. Hardware-based write protection is controlled by the state of the write-protect (WP) pin. Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation.
Published: |