Datasheet4U Logo Datasheet4U.com

VN751PT - High-side driver

General Description

The VN751PT is a monolithic device developed using STMicroelectronics' VIPower M03 technology, intended to drive any kind of load with one side connected to ground.

Active VCC pin voltage clamp protects the device against low energy spikes.

Key Features

  • 8 V to 36 V supply voltage range.
  • Up to IOUT = 2.5 A operating current.
  • RDS(on): 60 m.
  • CMOS compatible input.
  • Thermal shutdown.
  • Shorted load protection.
  • Undervoltage and overvoltage shutdown.
  • Protection against loss of ground.
  • Fast demagnetization of inductive loads.
  • Very low standby current.
  • Compliance to 61000-4-4 IEC test up to 4 kV.
  • Open drain status output High-side driver Datasheet - production data.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
VN750-E HIGH SIDE DRIVER ST Microelectronics
VN750PEP-E HIGH SIDE DRIVER ST Microelectronics
VN750PT-E HIGH SIDE DRIVER ST Microelectronics
VN750S-E HIGH SIDE DRIVER ST Microelectronics
VN750SM-E HIGH SIDE DRIVER ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
VN751S High-side driver
VN750 High-side driver
VN750-B5 HIGH SIDE DRIVER
VN750-B5 High-side driver
VN750B5-E HIGH SIDE DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
VN751PT Features  8 V to 36 V supply voltage range  Up to IOUT = 2.5 A operating current  RDS(on): 60 m  CMOS compatible input  Thermal shutdown  Shorted load protection  Undervoltage and overvoltage shutdown  Protection against loss of ground  Fast demagnetization of inductive loads  Very low standby current  Compliance to 61000-4-4 IEC test up to 4 kV  Open drain status output High-side driver Datasheet - production data Description The VN751PT is a monolithic device developed using STMicroelectronics' VIPower M03 technology, intended to drive any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes.