Datasheet4U Logo Datasheet4U.com

VIPer35 - Quasi-resonant high performance off line high voltage converter

Description

VIPER35 is a high voltage converter, which smartly integrates an 800 V rugged power MOSFET with a quasi-resonant current mode PWM control.

This IC meets severe energy saving standards as it has very low consumption and operates in burst mode under light load conditions.

Features

  • 800 V avalanche-rugged power MOSFET allowing ultra wide range input VAC to be achieved.
  • Embedded HV start-up and senseFET.
  • Built-in soft-start.
  • Quasi-resonant current mode PWM controller with drain current limit (IDlim).
  • Multifunction ZCD pin:.
  • Zero-current detection.
  • OCP threshold (IDlim) setup.
  • Output OVP (auto-restart).
  • Feed-forward compensation.
  • Support isolated flyback topology with optocoupler.

📥 Download Datasheet

Datasheet Details

Part number VIPer35
Manufacturer STMicroelectronics
File Size 11.50 MB
Description Quasi-resonant high performance off line high voltage converter
Datasheet download datasheet VIPer35 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
VIPER100-E Fixed frequency off-line converter ST Microelectronics
VIPER12ADIP-E Low Power OFF-Line SMPS Primary Switcher ST Microelectronics
VIPER12AS-E Low Power OFF-Line SMPS Primary Switcher ST Microelectronics
VIPER15 Off-line high voltage converters ST Microelectronics
VIPER20A-E SMPS primary IC ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
VIPER31 Energy saving offline high voltage converter
VIPER318 Energy saving offline high voltage converter
VIPER319 Energy saving offline high voltage converter
VIPer31SP BATTERY CHARGER
VIPer32 OFF LINE SMPS PRIMARY SWITCHER

Full PDF Text Transcription

Click to expand full text
VIPER35 Datasheet Quasi-resonant high performance off line high voltage converter SO 16 N Product status link VIPER35 Product label Features • 800 V avalanche-rugged power MOSFET allowing ultra wide range input VAC to be achieved • Embedded HV start-up and senseFET • Built-in soft-start • Quasi-resonant current mode PWM controller with drain current limit (IDlim) • Multifunction ZCD pin: – Zero-current detection – OCP threshold (IDlim) setup – Output OVP (auto-restart) – Feed-forward compensation • Support isolated flyback topology with optocoupler • Frequency limit: – 136 kHz (L type), 225 kHz (H type) • Less than 30 mW @ 230 VAC in no-load condition • Brown-out set through resistor divider • Short-circuit protection (auto-restart) • Hysteretic thermal shutdown Application • Auxiliary p
Published: |