Datasheet4U Logo Datasheet4U.com

TS5070 - PROGRAMMABLE CODEC/FILTER COMBO 2ND GENERATION

General Description

The TS5070series are the second generationcombined PCM CODEC and Filter devices optimized for digital switching applications on subscriber and trunk line cards.

Key Features

  • The 6/32 CI/O pin is set as an input ready for the first control byte of the initialization sequence. Other initial states in the Control Register are indicated in Table 2. A reset to these same.

📥 Download Datasheet

Other Datasheets by STMicroelectronics

Part Number Description
TS507 High precision rail-to-rail operational amplifier
TS5071 PROGRAMMABLE CODEC/FILTER COMBO 2ND GENERATION
TS512 Precision dual operational amplifiers
TS512A Precision dual operational amplifiers
TS512B Precision dual operational amplifiers
TS514 HIGH SPEED PRECISION QUAD OPERATIONAL AMPLIFIERS
TS514A HIGH SPEED PRECISION QUAD OPERATIONAL AMPLIFIERS
TS522 PRECISION LOW NOISE DUAL OPERATIONAL AMPLIFIERS
TS524 PRECISION LOW NOISE QUAD OPERATIONAL AMPLIFIERS
TS555 Low-power single CMOS timer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS5070 TS5071 PROGRAMMABLE CODEC/FILTER COMBO 2ND GENERATION COMPLETE CODEC AND FILTER SYSTEM INCLUDING : – TRANSMIT AND RECEIVE PCM CHANNEL FILTERS – µ -LAW OR A-LAW COMPANDING CODER AND DECODER – RECEIVE POWER AMPLIFIER DRIVES 300 Ω – 4.096 MHz SERIAL PCM DATA (max) PROGRAMMABLE FUNCTIONS : – TRANSMIT GAIN : 25.4 dB RANGE, 0.1 dB STEPS – RECEIVE GAIN : 25.4 dB RANGE, 0.1 dB STEPS – HYBRID BALANCE CANCELLATION FILTER – TIME-SLOT ASSIGNMENT: UP TO 64 SLOTS/FRAME – 2 PORT ASSIGNMENT (TS5070) – 6 INTERFACE LATCHES (TS5070) – A OR µ-LAW – ANALOG LOOPBACK – DIGITAL LOOPBACK DIRECT INTERFACE TO SOLID-STATE SLICs SIMPLIFIES TRANSFORMER SLIC, SINGLE WINDING SECONDARY STANDARD SERIAL CONTROL INTERFACE 80 mW OPERATING POWER (typ) 1.